MakeItFrom.com
Menu (ESC)

EN 1.4805 Stainless Steel vs. 7129 Aluminum

EN 1.4805 stainless steel belongs to the iron alloys classification, while 7129 Aluminum belongs to the aluminum alloys. There are 27 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4805 stainless steel and the bottom bar is 7129 Aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
69
Elongation at Break, % 9.0
9.0 to 9.1
Fatigue Strength, MPa 130
150 to 190
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
26
Tensile Strength: Ultimate (UTS), MPa 490
430
Tensile Strength: Yield (Proof), MPa 250
380 to 390

Thermal Properties

Latent Heat of Fusion, J/g 310
380
Maximum Temperature: Mechanical, °C 1000
180
Melting Completion (Liquidus), °C 1390
630
Melting Onset (Solidus), °C 1350
510
Specific Heat Capacity, J/kg-K 480
880
Thermal Conductivity, W/m-K 14
150
Thermal Expansion, µm/m-K 16
24

Otherwise Unclassified Properties

Base Metal Price, % relative 26
9.5
Density, g/cm3 7.9
2.9
Embodied Carbon, kg CO2/kg material 4.7
8.3
Embodied Energy, MJ/kg 66
150
Embodied Water, L/kg 180
1150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 37
37 to 38
Resilience: Unit (Modulus of Resilience), kJ/m3 150
1050 to 1090
Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 25
47
Strength to Weight: Axial, points 17
41
Strength to Weight: Bending, points 18
43 to 44
Thermal Diffusivity, mm2/s 3.7
58
Thermal Shock Resistance, points 11
19

Alloy Composition

Aluminum (Al), % 0
91 to 94
Carbon (C), % 0.2 to 0.5
0
Chromium (Cr), % 19 to 23
0 to 0.1
Copper (Cu), % 0
0.5 to 0.9
Gallium (Ga), % 0
0 to 0.030
Iron (Fe), % 44.9 to 56.8
0 to 0.3
Magnesium (Mg), % 0
1.3 to 2.0
Manganese (Mn), % 0 to 2.0
0 to 0.1
Molybdenum (Mo), % 0 to 0.5
0
Nickel (Ni), % 23 to 27
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 1.0 to 2.0
0 to 0.15
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0
0 to 0.050
Vanadium (V), % 0
0 to 0.050
Zinc (Zn), % 0
4.2 to 5.2
Residuals, % 0
0 to 0.15