MakeItFrom.com
Menu (ESC)

EN 1.4807 Stainless Steel vs. EN AC-43200 Aluminum

EN 1.4807 stainless steel belongs to the iron alloys classification, while EN AC-43200 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4807 stainless steel and the bottom bar is EN AC-43200 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 140
60 to 88
Elastic (Young's, Tensile) Modulus, GPa 190
72
Elongation at Break, % 4.5
1.1
Fatigue Strength, MPa 120
67
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 75
27
Tensile Strength: Ultimate (UTS), MPa 480
190 to 260
Tensile Strength: Yield (Proof), MPa 250
97 to 220

Thermal Properties

Latent Heat of Fusion, J/g 320
540
Maximum Temperature: Mechanical, °C 1000
170
Melting Completion (Liquidus), °C 1390
600
Melting Onset (Solidus), °C 1350
590
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 12
140
Thermal Expansion, µm/m-K 15
22

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 1.7
34
Electrical Conductivity: Equal Weight (Specific), % IACS 1.9
120

Otherwise Unclassified Properties

Base Metal Price, % relative 39
9.5
Density, g/cm3 8.0
2.6
Embodied Carbon, kg CO2/kg material 6.8
7.8
Embodied Energy, MJ/kg 97
150
Embodied Water, L/kg 190
1070

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 18
1.8 to 2.7
Resilience: Unit (Modulus of Resilience), kJ/m3 160
66 to 330
Stiffness to Weight: Axial, points 13
15
Stiffness to Weight: Bending, points 24
54
Strength to Weight: Axial, points 17
20 to 28
Strength to Weight: Bending, points 17
28 to 35
Thermal Diffusivity, mm2/s 3.2
59
Thermal Shock Resistance, points 12
8.8 to 12

Alloy Composition

Aluminum (Al), % 0
86.1 to 90.8
Carbon (C), % 0.3 to 0.5
0
Chromium (Cr), % 17 to 20
0
Copper (Cu), % 0
0 to 0.35
Iron (Fe), % 36.6 to 46.7
0 to 0.65
Lead (Pb), % 0
0 to 0.1
Magnesium (Mg), % 0
0.2 to 0.45
Manganese (Mn), % 0 to 2.0
0 to 0.55
Molybdenum (Mo), % 0 to 0.5
0
Nickel (Ni), % 34 to 36
0 to 0.15
Niobium (Nb), % 1.0 to 1.8
0
Phosphorus (P), % 0 to 0.040
0
Silicon (Si), % 1.0 to 2.5
9.0 to 11
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0
0 to 0.2
Zinc (Zn), % 0
0 to 0.35
Residuals, % 0
0 to 0.15