MakeItFrom.com
Menu (ESC)

EN 1.4876 Stainless Steel vs. 6060 Aluminum

EN 1.4876 stainless steel belongs to the iron alloys classification, while 6060 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4876 stainless steel and the bottom bar is 6060 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
68
Elongation at Break, % 33
9.0 to 16
Fatigue Strength, MPa 150
37 to 70
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 77
26
Shear Strength, MPa 370
86 to 130
Tensile Strength: Ultimate (UTS), MPa 570
140 to 220
Tensile Strength: Yield (Proof), MPa 190
71 to 170

Thermal Properties

Latent Heat of Fusion, J/g 300
400
Maximum Temperature: Mechanical, °C 1100
160
Melting Completion (Liquidus), °C 1400
660
Melting Onset (Solidus), °C 1350
610
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 12
210
Thermal Expansion, µm/m-K 14
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 1.7
54
Electrical Conductivity: Equal Weight (Specific), % IACS 1.9
180

Otherwise Unclassified Properties

Base Metal Price, % relative 30
9.5
Density, g/cm3 8.0
2.7
Embodied Carbon, kg CO2/kg material 5.3
8.3
Embodied Energy, MJ/kg 76
150
Embodied Water, L/kg 200
1190

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 140
13 to 24
Resilience: Unit (Modulus of Resilience), kJ/m3 94
37 to 210
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 24
50
Strength to Weight: Axial, points 20
14 to 23
Strength to Weight: Bending, points 19
22 to 30
Thermal Diffusivity, mm2/s 3.2
85
Thermal Shock Resistance, points 14
6.3 to 9.9

Alloy Composition

Aluminum (Al), % 0.15 to 0.6
97.9 to 99.3
Carbon (C), % 0 to 0.12
0
Chromium (Cr), % 19 to 23
0 to 0.050
Copper (Cu), % 0
0 to 0.1
Iron (Fe), % 38.6 to 50.7
0.1 to 0.3
Magnesium (Mg), % 0
0.35 to 0.6
Manganese (Mn), % 0 to 2.0
0 to 0.1
Nickel (Ni), % 30 to 34
0
Phosphorus (P), % 0 to 0.030
0
Silicon (Si), % 0 to 1.0
0.3 to 0.6
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0.15 to 0.6
0 to 0.1
Zinc (Zn), % 0
0 to 0.15
Residuals, % 0
0 to 0.15