MakeItFrom.com
Menu (ESC)

EN 1.4938 Stainless Steel vs. C443.0 Aluminum

EN 1.4938 stainless steel belongs to the iron alloys classification, while C443.0 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4938 stainless steel and the bottom bar is C443.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
71
Elongation at Break, % 16 to 17
9.0
Fatigue Strength, MPa 390 to 520
120
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
27
Shear Strength, MPa 540 to 630
130
Tensile Strength: Ultimate (UTS), MPa 870 to 1030
230
Tensile Strength: Yield (Proof), MPa 640 to 870
100

Thermal Properties

Latent Heat of Fusion, J/g 270
470
Maximum Temperature: Mechanical, °C 750
170
Melting Completion (Liquidus), °C 1460
630
Melting Onset (Solidus), °C 1420
600
Specific Heat Capacity, J/kg-K 470
900
Thermal Conductivity, W/m-K 30
140
Thermal Expansion, µm/m-K 11
22

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.9
37
Electrical Conductivity: Equal Weight (Specific), % IACS 3.3
120

Otherwise Unclassified Properties

Base Metal Price, % relative 10
9.5
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 3.3
7.9
Embodied Energy, MJ/kg 47
150
Embodied Water, L/kg 110
1120

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 140 to 160
17
Resilience: Unit (Modulus of Resilience), kJ/m3 1050 to 1920
70
Stiffness to Weight: Axial, points 14
15
Stiffness to Weight: Bending, points 25
51
Strength to Weight: Axial, points 31 to 37
24
Strength to Weight: Bending, points 26 to 29
31
Thermal Diffusivity, mm2/s 8.1
58
Thermal Shock Resistance, points 30 to 35
10

Alloy Composition

Aluminum (Al), % 0
89.6 to 95.5
Carbon (C), % 0.080 to 0.15
0
Chromium (Cr), % 11 to 12.5
0
Copper (Cu), % 0
0 to 0.6
Iron (Fe), % 80.5 to 84.8
0 to 2.0
Magnesium (Mg), % 0
0 to 0.1
Manganese (Mn), % 0.4 to 0.9
0 to 0.35
Molybdenum (Mo), % 1.5 to 2.0
0
Nickel (Ni), % 2.0 to 3.0
0 to 0.5
Nitrogen (N), % 0.020 to 0.040
0
Phosphorus (P), % 0 to 0.025
0
Silicon (Si), % 0 to 0.5
4.5 to 6.0
Sulfur (S), % 0 to 0.015
0
Tin (Sn), % 0
0 to 0.15
Vanadium (V), % 0.25 to 0.4
0
Zinc (Zn), % 0
0 to 0.5
Residuals, % 0
0 to 0.25