MakeItFrom.com
Menu (ESC)

EN 1.4971 Stainless Steel vs. 5110A Aluminum

EN 1.4971 stainless steel belongs to the iron alloys classification, while 5110A aluminum belongs to the aluminum alloys. There are 28 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4971 stainless steel and the bottom bar is 5110A aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 210
68
Elongation at Break, % 34
4.5 to 28
Fatigue Strength, MPa 270
37 to 77
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 81
26
Shear Strength, MPa 530
66 to 110
Tensile Strength: Ultimate (UTS), MPa 800
100 to 190
Tensile Strength: Yield (Proof), MPa 340
32 to 170

Thermal Properties

Latent Heat of Fusion, J/g 300
400
Maximum Temperature: Mechanical, °C 1100
180
Melting Completion (Liquidus), °C 1460
640
Melting Onset (Solidus), °C 1410
640
Specific Heat Capacity, J/kg-K 450
900
Thermal Conductivity, W/m-K 13
220
Thermal Expansion, µm/m-K 15
23

Otherwise Unclassified Properties

Base Metal Price, % relative 70
9.5
Density, g/cm3 8.4
2.7
Embodied Carbon, kg CO2/kg material 7.6
8.3
Embodied Energy, MJ/kg 110
150
Embodied Water, L/kg 300
1190

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 220
6.8 to 22
Resilience: Unit (Modulus of Resilience), kJ/m3 280
7.6 to 200
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 24
50
Strength to Weight: Axial, points 26
10 to 19
Strength to Weight: Bending, points 23
18 to 27
Thermal Diffusivity, mm2/s 3.4
91
Thermal Shock Resistance, points 19
4.5 to 8.4

Alloy Composition

Aluminum (Al), % 0
98.5 to 99.8
Carbon (C), % 0.080 to 0.16
0
Chromium (Cr), % 20 to 22.5
0
Cobalt (Co), % 18.5 to 21
0
Copper (Cu), % 0
0 to 0.2
Iron (Fe), % 24.3 to 37.1
0 to 0.25
Magnesium (Mg), % 0
0.2 to 0.6
Manganese (Mn), % 0 to 2.0
0 to 0.2
Molybdenum (Mo), % 2.5 to 3.5
0
Nickel (Ni), % 19 to 21
0
Niobium (Nb), % 0.75 to 1.3
0
Nitrogen (N), % 0.1 to 0.2
0
Phosphorus (P), % 0 to 0.035
0
Silicon (Si), % 0 to 1.0
0 to 0.15
Sulfur (S), % 0 to 0.015
0
Tungsten (W), % 2.0 to 3.0
0
Zinc (Zn), % 0
0 to 0.030
Residuals, % 0
0 to 0.1