MakeItFrom.com
Menu (ESC)

EN 1.4971 Stainless Steel vs. 6151 Aluminum

EN 1.4971 stainless steel belongs to the iron alloys classification, while 6151 aluminum belongs to the aluminum alloys. There are 28 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4971 stainless steel and the bottom bar is 6151 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 210
69
Elongation at Break, % 34
1.1 to 5.7
Fatigue Strength, MPa 270
80 to 100
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 81
26
Shear Strength, MPa 530
190 to 200
Tensile Strength: Ultimate (UTS), MPa 800
330 to 340
Tensile Strength: Yield (Proof), MPa 340
270 to 280

Thermal Properties

Latent Heat of Fusion, J/g 300
410
Maximum Temperature: Mechanical, °C 1100
170
Melting Completion (Liquidus), °C 1460
650
Melting Onset (Solidus), °C 1410
590
Specific Heat Capacity, J/kg-K 450
900
Thermal Conductivity, W/m-K 13
170
Thermal Expansion, µm/m-K 15
23

Otherwise Unclassified Properties

Base Metal Price, % relative 70
9.5
Density, g/cm3 8.4
2.7
Embodied Carbon, kg CO2/kg material 7.6
8.2
Embodied Energy, MJ/kg 110
150
Embodied Water, L/kg 300
1180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 220
3.5 to 18
Resilience: Unit (Modulus of Resilience), kJ/m3 280
520 to 580
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 24
50
Strength to Weight: Axial, points 26
34
Strength to Weight: Bending, points 23
39
Thermal Diffusivity, mm2/s 3.4
70
Thermal Shock Resistance, points 19
15

Alloy Composition

Aluminum (Al), % 0
95.6 to 98.8
Carbon (C), % 0.080 to 0.16
0
Chromium (Cr), % 20 to 22.5
0.15 to 0.35
Cobalt (Co), % 18.5 to 21
0
Copper (Cu), % 0
0 to 0.35
Iron (Fe), % 24.3 to 37.1
0 to 1.0
Magnesium (Mg), % 0
0.45 to 0.8
Manganese (Mn), % 0 to 2.0
0 to 0.2
Molybdenum (Mo), % 2.5 to 3.5
0
Nickel (Ni), % 19 to 21
0
Niobium (Nb), % 0.75 to 1.3
0
Nitrogen (N), % 0.1 to 0.2
0
Phosphorus (P), % 0 to 0.035
0
Silicon (Si), % 0 to 1.0
0.6 to 1.2
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0
0 to 0.15
Tungsten (W), % 2.0 to 3.0
0
Zinc (Zn), % 0
0 to 0.25
Residuals, % 0
0 to 0.15