MakeItFrom.com
Menu (ESC)

EN 1.4983 Stainless Steel vs. 6025 Aluminum

EN 1.4983 stainless steel belongs to the iron alloys classification, while 6025 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.4983 stainless steel and the bottom bar is 6025 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
70
Elongation at Break, % 40
2.8 to 10
Fatigue Strength, MPa 200
67 to 110
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 78
26
Shear Strength, MPa 430
110 to 140
Tensile Strength: Ultimate (UTS), MPa 630
190 to 240
Tensile Strength: Yield (Proof), MPa 230
68 to 210

Thermal Properties

Latent Heat of Fusion, J/g 290
410
Maximum Temperature: Mechanical, °C 940
160
Melting Completion (Liquidus), °C 1440
650
Melting Onset (Solidus), °C 1400
550
Specific Heat Capacity, J/kg-K 470
900
Thermal Conductivity, W/m-K 15
130
Thermal Expansion, µm/m-K 16
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 2.3
33
Electrical Conductivity: Equal Weight (Specific), % IACS 2.7
110

Otherwise Unclassified Properties

Base Metal Price, % relative 19
9.5
Density, g/cm3 7.9
2.8
Embodied Carbon, kg CO2/kg material 4.1
8.5
Embodied Energy, MJ/kg 56
150
Embodied Water, L/kg 150
1160

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 200
6.0 to 15
Resilience: Unit (Modulus of Resilience), kJ/m3 140
33 to 310
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 22
19 to 24
Strength to Weight: Bending, points 21
26 to 31
Thermal Diffusivity, mm2/s 4.0
54
Thermal Shock Resistance, points 14
8.2 to 10

Alloy Composition

Aluminum (Al), % 0
91.7 to 96.3
Boron (B), % 0.0015 to 0.0060
0
Carbon (C), % 0.040 to 0.080
0
Chromium (Cr), % 16 to 18
0 to 0.2
Copper (Cu), % 0
0.2 to 0.7
Iron (Fe), % 61.8 to 69.6
0 to 0.7
Magnesium (Mg), % 0
2.1 to 3.0
Manganese (Mn), % 0 to 2.0
0.6 to 1.4
Molybdenum (Mo), % 2.0 to 2.5
0
Nickel (Ni), % 12 to 14
0
Phosphorus (P), % 0 to 0.035
0
Silicon (Si), % 0 to 0.75
0.8 to 1.5
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0.4 to 0.8
0 to 0.2
Zinc (Zn), % 0
0 to 0.5
Residuals, % 0
0 to 0.15