MakeItFrom.com
Menu (ESC)

EN 1.5113 Steel vs. 6182 Aluminum

EN 1.5113 steel belongs to the iron alloys classification, while 6182 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.5113 steel and the bottom bar is 6182 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
70
Elongation at Break, % 11 to 18
6.8 to 13
Fatigue Strength, MPa 220 to 470
63 to 99
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 72
26
Shear Strength, MPa 360 to 540
140 to 190
Tensile Strength: Ultimate (UTS), MPa 580 to 900
230 to 320
Tensile Strength: Yield (Proof), MPa 320 to 770
130 to 270

Thermal Properties

Latent Heat of Fusion, J/g 260
410
Maximum Temperature: Mechanical, °C 400
190
Melting Completion (Liquidus), °C 1450
640
Melting Onset (Solidus), °C 1410
600
Specific Heat Capacity, J/kg-K 480
900
Thermal Conductivity, W/m-K 52
160
Thermal Expansion, µm/m-K 13
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.2
40
Electrical Conductivity: Equal Weight (Specific), % IACS 8.4
130

Otherwise Unclassified Properties

Base Metal Price, % relative 2.0
9.5
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 1.4
8.4
Embodied Energy, MJ/kg 19
150
Embodied Water, L/kg 48
1170

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 91 to 96
21 to 26
Resilience: Unit (Modulus of Resilience), kJ/m3 270 to 1570
110 to 520
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 24
50
Strength to Weight: Axial, points 21 to 32
23 to 32
Strength to Weight: Bending, points 20 to 27
30 to 38
Thermal Diffusivity, mm2/s 14
65
Thermal Shock Resistance, points 17 to 26
10 to 14

Alloy Composition

Aluminum (Al), % 0
95 to 97.9
Carbon (C), % 0 to 0.1
0
Chromium (Cr), % 0
0 to 0.25
Copper (Cu), % 0
0 to 0.1
Iron (Fe), % 97 to 97.5
0 to 0.5
Magnesium (Mg), % 0
0.7 to 1.2
Manganese (Mn), % 1.6 to 1.8
0.5 to 1.0
Phosphorus (P), % 0 to 0.025
0
Silicon (Si), % 0.9 to 1.1
0.9 to 1.3
Sulfur (S), % 0 to 0.025
0
Titanium (Ti), % 0
0 to 0.1
Zinc (Zn), % 0
0 to 0.2
Zirconium (Zr), % 0
0.050 to 0.2
Residuals, % 0
0 to 0.15