MakeItFrom.com
Menu (ESC)

EN 1.5113 Steel vs. 712.0 Aluminum

EN 1.5113 steel belongs to the iron alloys classification, while 712.0 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.5113 steel and the bottom bar is 712.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 170 to 270
75 to 90
Elastic (Young's, Tensile) Modulus, GPa 190
70
Elongation at Break, % 11 to 18
4.5 to 4.7
Fatigue Strength, MPa 220 to 470
140 to 180
Poisson's Ratio 0.29
0.32
Shear Modulus, GPa 72
27
Shear Strength, MPa 360 to 540
180
Tensile Strength: Ultimate (UTS), MPa 580 to 900
250 to 260
Tensile Strength: Yield (Proof), MPa 320 to 770
180 to 200

Thermal Properties

Latent Heat of Fusion, J/g 260
380
Maximum Temperature: Mechanical, °C 400
190
Melting Completion (Liquidus), °C 1450
640
Melting Onset (Solidus), °C 1410
610
Specific Heat Capacity, J/kg-K 480
870
Thermal Conductivity, W/m-K 52
160
Thermal Expansion, µm/m-K 13
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.2
40
Electrical Conductivity: Equal Weight (Specific), % IACS 8.4
120

Otherwise Unclassified Properties

Base Metal Price, % relative 2.0
9.5
Density, g/cm3 7.8
3.0
Embodied Carbon, kg CO2/kg material 1.4
8.0
Embodied Energy, MJ/kg 19
150
Embodied Water, L/kg 48
1140

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 91 to 96
11
Resilience: Unit (Modulus of Resilience), kJ/m3 270 to 1570
240 to 270
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 24
46
Strength to Weight: Axial, points 21 to 32
24 to 25
Strength to Weight: Bending, points 20 to 27
30 to 31
Thermal Diffusivity, mm2/s 14
62
Thermal Shock Resistance, points 17 to 26
11

Alloy Composition

Aluminum (Al), % 0
90.7 to 94
Carbon (C), % 0 to 0.1
0
Chromium (Cr), % 0
0.4 to 0.6
Copper (Cu), % 0
0 to 0.25
Iron (Fe), % 97 to 97.5
0 to 0.5
Magnesium (Mg), % 0
0.5 to 0.65
Manganese (Mn), % 1.6 to 1.8
0 to 0.1
Phosphorus (P), % 0 to 0.025
0
Silicon (Si), % 0.9 to 1.1
0 to 0.3
Sulfur (S), % 0 to 0.025
0
Titanium (Ti), % 0
0.15 to 0.25
Zinc (Zn), % 0
5.0 to 6.5
Residuals, % 0
0 to 0.2