MakeItFrom.com
Menu (ESC)

EN 1.5525 Steel vs. 85-platinum 15-iridium

EN 1.5525 steel belongs to the iron alloys classification, while 85-platinum 15-iridium belongs to the otherwise unclassified metals. There are 19 material properties with values for both materials. Properties with values for just one material (13, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.5525 steel and the bottom bar is 85-platinum 15-iridium.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
220
Elongation at Break, % 11 to 21
5.5 to 34
Poisson's Ratio 0.29
0.38
Shear Modulus, GPa 73
81
Shear Strength, MPa 310 to 350
370 to 420
Tensile Strength: Ultimate (UTS), MPa 440 to 1440
560 to 730

Thermal Properties

Latent Heat of Fusion, J/g 250
110
Melting Completion (Liquidus), °C 1460
1820
Melting Onset (Solidus), °C 1420
1790
Specific Heat Capacity, J/kg-K 470
130
Thermal Expansion, µm/m-K 13
8.4

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.1
6.2
Electrical Conductivity: Equal Weight (Specific), % IACS 8.2
2.6

Otherwise Unclassified Properties

Density, g/cm3 7.8
22

Common Calculations

Stiffness to Weight: Axial, points 13
5.7
Stiffness to Weight: Bending, points 24
9.3
Strength to Weight: Axial, points 16 to 51
7.1 to 9.3
Strength to Weight: Bending, points 16 to 36
6.9 to 8.3
Thermal Shock Resistance, points 13 to 42
21 to 28

Alloy Composition

Boron (B), % 0.00080 to 0.0050
0
Carbon (C), % 0.18 to 0.23
0
Chromium (Cr), % 0 to 0.3
0
Copper (Cu), % 0 to 0.25
0
Iridium (Ir), % 0
14.5 to 15.5
Iron (Fe), % 97.7 to 98.9
0
Manganese (Mn), % 0.9 to 1.2
0
Phosphorus (P), % 0 to 0.025
0
Platinum (Pt), % 0
84.3 to 85.5
Silicon (Si), % 0 to 0.3
0
Sulfur (S), % 0 to 0.025
0
Residuals, % 0
0 to 0.2

Comparable Variants