EN 1.5525 Steel vs. EN-MC21210 Magnesium
EN 1.5525 steel belongs to the iron alloys classification, while EN-MC21210 magnesium belongs to the magnesium alloys. There are 31 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is EN 1.5525 steel and the bottom bar is EN-MC21210 magnesium.
Metric UnitsUS Customary Units
Mechanical Properties
Brinell Hardness | 130 to 180 | |
48 |
Elastic (Young's, Tensile) Modulus, GPa | 190 | |
44 |
Elongation at Break, % | 11 to 21 | |
14 |
Fatigue Strength, MPa | 210 to 310 | |
70 |
Poisson's Ratio | 0.29 | |
0.29 |
Shear Modulus, GPa | 73 | |
17 |
Shear Strength, MPa | 310 to 350 | |
110 |
Tensile Strength: Ultimate (UTS), MPa | 440 to 1440 | |
190 |
Tensile Strength: Yield (Proof), MPa | 300 to 490 | |
90 |
Thermal Properties
Latent Heat of Fusion, J/g | 250 | |
350 |
Maximum Temperature: Mechanical, °C | 400 | |
100 |
Melting Completion (Liquidus), °C | 1460 | |
600 |
Melting Onset (Solidus), °C | 1420 | |
570 |
Specific Heat Capacity, J/kg-K | 470 | |
1000 |
Thermal Conductivity, W/m-K | 50 | |
120 |
Thermal Expansion, µm/m-K | 13 | |
27 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 7.1 | |
24 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 8.2 | |
130 |
Otherwise Unclassified Properties
Base Metal Price, % relative | 1.9 | |
12 |
Density, g/cm3 | 7.8 | |
1.6 |
Embodied Carbon, kg CO2/kg material | 1.4 | |
24 |
Embodied Energy, MJ/kg | 19 | |
160 |
Embodied Water, L/kg | 48 | |
980 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 44 to 240 | |
22 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 240 to 640 | |
92 |
Stiffness to Weight: Axial, points | 13 | |
15 |
Stiffness to Weight: Bending, points | 24 | |
72 |
Strength to Weight: Axial, points | 16 to 51 | |
32 |
Strength to Weight: Bending, points | 16 to 36 | |
44 |
Thermal Diffusivity, mm2/s | 13 | |
76 |
Thermal Shock Resistance, points | 13 to 42 | |
11 |
Alloy Composition
Aluminum (Al), % | 0 | |
1.6 to 2.6 |
Boron (B), % | 0.00080 to 0.0050 | |
0 |
Carbon (C), % | 0.18 to 0.23 | |
0 |
Chromium (Cr), % | 0 to 0.3 | |
0 |
Copper (Cu), % | 0 to 0.25 | |
0 to 0.010 |
Iron (Fe), % | 97.7 to 98.9 | |
0 to 0.0050 |
Magnesium (Mg), % | 0 | |
96.3 to 98.3 |
Manganese (Mn), % | 0.9 to 1.2 | |
0.1 to 0.7 |
Nickel (Ni), % | 0 | |
0 to 0.0020 |
Phosphorus (P), % | 0 to 0.025 | |
0 |
Silicon (Si), % | 0 to 0.3 | |
0 to 0.1 |
Sulfur (S), % | 0 to 0.025 | |
0 |
Zinc (Zn), % | 0 | |
0 to 0.2 |
Residuals, % | 0 | |
0 to 0.010 |