MakeItFrom.com
Menu (ESC)

EN 1.5662 Steel vs. 5056 Aluminum

EN 1.5662 steel belongs to the iron alloys classification, while 5056 aluminum belongs to the aluminum alloys. There are 28 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.5662 steel and the bottom bar is 5056 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
67
Elongation at Break, % 20
4.9 to 31
Fatigue Strength, MPa 380 to 450
140 to 200
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 73
25
Shear Strength, MPa 460 to 470
170 to 240
Tensile Strength: Ultimate (UTS), MPa 740 to 750
290 to 460
Tensile Strength: Yield (Proof), MPa 550 to 660
150 to 410

Thermal Properties

Latent Heat of Fusion, J/g 250
400
Maximum Temperature: Mechanical, °C 430
190
Melting Completion (Liquidus), °C 1460
640
Melting Onset (Solidus), °C 1410
570
Specific Heat Capacity, J/kg-K 470
910
Thermal Expansion, µm/m-K 13
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 8.7
29
Electrical Conductivity: Equal Weight (Specific), % IACS 9.8
99

Otherwise Unclassified Properties

Base Metal Price, % relative 7.5
9.5
Density, g/cm3 8.0
2.7
Embodied Carbon, kg CO2/kg material 2.3
9.0
Embodied Energy, MJ/kg 31
150
Embodied Water, L/kg 63
1180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 140 to 150
12 to 140
Resilience: Unit (Modulus of Resilience), kJ/m3 810 to 1150
170 to 1220
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 24
51
Strength to Weight: Axial, points 26
30 to 48
Strength to Weight: Bending, points 23
36 to 50
Thermal Shock Resistance, points 22
13 to 20

Alloy Composition

Aluminum (Al), % 0
93 to 95.4
Carbon (C), % 0 to 0.1
0
Chromium (Cr), % 0
0.050 to 0.2
Copper (Cu), % 0
0 to 0.1
Iron (Fe), % 88.6 to 91.2
0 to 0.4
Magnesium (Mg), % 0
4.5 to 5.6
Manganese (Mn), % 0.3 to 0.8
0.050 to 0.2
Molybdenum (Mo), % 0 to 0.1
0
Nickel (Ni), % 8.5 to 10
0
Phosphorus (P), % 0 to 0.020
0
Silicon (Si), % 0 to 0.35
0 to 0.3
Sulfur (S), % 0 to 0.0050
0
Vanadium (V), % 0 to 0.050
0
Zinc (Zn), % 0
0 to 0.1
Residuals, % 0
0 to 0.15