MakeItFrom.com
Menu (ESC)

EN 1.6522 Steel vs. 355.0 Aluminum

EN 1.6522 steel belongs to the iron alloys classification, while 355.0 aluminum belongs to the aluminum alloys. There are 25 material properties with values for both materials. Properties with values for just one material (7, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.6522 steel and the bottom bar is 355.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 150 to 190
72 to 83
Elastic (Young's, Tensile) Modulus, GPa 190
71
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 73
27
Tensile Strength: Ultimate (UTS), MPa 500 to 1460
200 to 260

Thermal Properties

Latent Heat of Fusion, J/g 250
470
Maximum Temperature: Mechanical, °C 410
180
Melting Completion (Liquidus), °C 1460
620
Melting Onset (Solidus), °C 1420
560
Specific Heat Capacity, J/kg-K 470
890
Thermal Conductivity, W/m-K 39
150 to 170
Thermal Expansion, µm/m-K 13
22

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.3
38 to 43
Electrical Conductivity: Equal Weight (Specific), % IACS 8.4
120 to 140

Otherwise Unclassified Properties

Base Metal Price, % relative 2.6
9.5
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 1.5
8.0
Embodied Energy, MJ/kg 20
150
Embodied Water, L/kg 51
1120

Common Calculations

Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 24
51
Strength to Weight: Axial, points 18 to 52
20 to 27
Strength to Weight: Bending, points 18 to 36
28 to 33
Thermal Diffusivity, mm2/s 10
60 to 69
Thermal Shock Resistance, points 15 to 43
9.1 to 12

Alloy Composition

Aluminum (Al), % 0 to 0.050
90.3 to 94.1
Carbon (C), % 0.17 to 0.23
0
Chromium (Cr), % 0.35 to 0.7
0 to 0.25
Copper (Cu), % 0 to 0.3
1.0 to 1.5
Iron (Fe), % 96.6 to 98.5
0 to 0.6
Magnesium (Mg), % 0
0.4 to 0.6
Manganese (Mn), % 0.6 to 1.0
0 to 0.5
Molybdenum (Mo), % 0.15 to 0.25
0
Nickel (Ni), % 0.4 to 0.7
0
Oxygen (O), % 0 to 0.0020
0
Phosphorus (P), % 0 to 0.025
0
Silicon (Si), % 0 to 0.4
4.5 to 5.5
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0
0 to 0.35
Residuals, % 0
0 to 0.15