MakeItFrom.com
Menu (ESC)

EN 1.6579 Steel vs. 8090 Aluminum

EN 1.6579 steel belongs to the iron alloys classification, while 8090 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.6579 steel and the bottom bar is 8090 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 190
67
Elongation at Break, % 11 to 14
3.5 to 13
Fatigue Strength, MPa 380 to 570
91 to 140
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 73
25
Tensile Strength: Ultimate (UTS), MPa 850 to 980
340 to 490
Tensile Strength: Yield (Proof), MPa 600 to 910
210 to 420

Thermal Properties

Latent Heat of Fusion, J/g 250
400
Maximum Temperature: Mechanical, °C 440
190
Melting Completion (Liquidus), °C 1460
660
Melting Onset (Solidus), °C 1410
600
Specific Heat Capacity, J/kg-K 470
960
Thermal Conductivity, W/m-K 39
95 to 160
Thermal Expansion, µm/m-K 13
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.7
20
Electrical Conductivity: Equal Weight (Specific), % IACS 8.8
66

Otherwise Unclassified Properties

Base Metal Price, % relative 3.7
18
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 1.7
8.6
Embodied Energy, MJ/kg 22
170
Embodied Water, L/kg 56
1160

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 100 to 120
16 to 41
Resilience: Unit (Modulus of Resilience), kJ/m3 950 to 2210
340 to 1330
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 24
50
Strength to Weight: Axial, points 30 to 35
34 to 49
Strength to Weight: Bending, points 25 to 28
39 to 50
Thermal Diffusivity, mm2/s 11
36 to 60
Thermal Shock Resistance, points 25 to 29
15 to 22

Alloy Composition

Aluminum (Al), % 0
93 to 98.4
Carbon (C), % 0.32 to 0.38
0
Chromium (Cr), % 1.4 to 1.7
0 to 0.1
Copper (Cu), % 0
1.0 to 1.6
Iron (Fe), % 94.2 to 96.1
0 to 0.3
Lithium (Li), % 0
2.2 to 2.7
Magnesium (Mg), % 0
0.6 to 1.3
Manganese (Mn), % 0.6 to 1.0
0 to 0.1
Molybdenum (Mo), % 0.15 to 0.35
0
Nickel (Ni), % 1.4 to 1.7
0
Phosphorus (P), % 0 to 0.025
0
Silicon (Si), % 0 to 0.6
0 to 0.2
Sulfur (S), % 0 to 0.030
0
Titanium (Ti), % 0
0 to 0.1
Zinc (Zn), % 0
0 to 0.25
Zirconium (Zr), % 0
0.040 to 0.16
Residuals, % 0
0 to 0.15

Comparable Variants