EN 1.7231 Steel vs. EV31A Magnesium
EN 1.7231 steel belongs to the iron alloys classification, while EV31A magnesium belongs to the magnesium alloys. There are 24 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is EN 1.7231 steel and the bottom bar is EV31A magnesium.
Metric UnitsUS Customary Units
Mechanical Properties
Brinell Hardness | 240 to 280 | |
70 |
Elastic (Young's, Tensile) Modulus, GPa | 190 | |
44 |
Elongation at Break, % | 11 to 12 | |
3.5 |
Fatigue Strength, MPa | 360 to 500 | |
120 |
Poisson's Ratio | 0.29 | |
0.27 |
Shear Modulus, GPa | 73 | |
17 |
Tensile Strength: Ultimate (UTS), MPa | 790 to 930 | |
260 |
Tensile Strength: Yield (Proof), MPa | 570 to 800 | |
170 |
Thermal Properties
Maximum Temperature: Mechanical, °C | 420 | |
200 |
Melting Onset (Solidus), °C | 1420 | |
590 |
Specific Heat Capacity, J/kg-K | 470 | |
1000 |
Thermal Conductivity, W/m-K | 46 | |
86 |
Thermal Expansion, µm/m-K | 13 | |
27 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 7.3 | |
18 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 8.4 | |
90 |
Otherwise Unclassified Properties
Density, g/cm3 | 7.8 | |
1.8 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 87 to 100 | |
8.1 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 870 to 1700 | |
330 |
Stiffness to Weight: Axial, points | 13 | |
13 |
Stiffness to Weight: Bending, points | 24 | |
65 |
Strength to Weight: Axial, points | 28 to 33 | |
40 |
Strength to Weight: Bending, points | 24 to 27 | |
50 |
Thermal Diffusivity, mm2/s | 12 | |
47 |
Thermal Shock Resistance, points | 23 to 27 | |
16 |