MakeItFrom.com
Menu (ESC)

EN 1.7365 Steel vs. 5050 Aluminum

EN 1.7365 steel belongs to the iron alloys classification, while 5050 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.7365 steel and the bottom bar is 5050 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 210
36 to 68
Elastic (Young's, Tensile) Modulus, GPa 190
68
Elongation at Break, % 18
1.7 to 22
Fatigue Strength, MPa 320
45 to 100
Poisson's Ratio 0.29
0.33
Shear Modulus, GPa 74
26
Tensile Strength: Ultimate (UTS), MPa 700
140 to 250
Tensile Strength: Yield (Proof), MPa 470
50 to 210

Thermal Properties

Latent Heat of Fusion, J/g 260
400
Maximum Temperature: Mechanical, °C 510
180
Melting Completion (Liquidus), °C 1460
650
Melting Onset (Solidus), °C 1420
630
Specific Heat Capacity, J/kg-K 470
900
Thermal Conductivity, W/m-K 40
190
Thermal Expansion, µm/m-K 13
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 8.2
50
Electrical Conductivity: Equal Weight (Specific), % IACS 9.4
170

Otherwise Unclassified Properties

Base Metal Price, % relative 4.4
9.5
Density, g/cm3 7.8
2.7
Embodied Carbon, kg CO2/kg material 1.8
8.4
Embodied Energy, MJ/kg 24
150
Embodied Water, L/kg 70
1190

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 110
4.1 to 24
Resilience: Unit (Modulus of Resilience), kJ/m3 580
18 to 330
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 25
50
Strength to Weight: Axial, points 25
15 to 26
Strength to Weight: Bending, points 22
22 to 33
Thermal Diffusivity, mm2/s 11
79
Thermal Shock Resistance, points 20
6.3 to 11

Alloy Composition

Aluminum (Al), % 0
96.3 to 98.9
Carbon (C), % 0.12 to 0.19
0
Chromium (Cr), % 4.0 to 6.0
0 to 0.1
Copper (Cu), % 0 to 0.3
0 to 0.2
Iron (Fe), % 91.2 to 94.9
0 to 0.7
Magnesium (Mg), % 0
1.1 to 1.8
Manganese (Mn), % 0.5 to 0.8
0 to 0.1
Molybdenum (Mo), % 0.45 to 0.65
0
Phosphorus (P), % 0 to 0.025
0
Silicon (Si), % 0 to 0.8
0 to 0.4
Sulfur (S), % 0 to 0.025
0
Vanadium (V), % 0 to 0.050
0
Zinc (Zn), % 0
0 to 0.25
Residuals, % 0
0 to 0.15