MakeItFrom.com
Menu (ESC)

EN 1.8152 Steel vs. 712.0 Aluminum

EN 1.8152 steel belongs to the iron alloys classification, while 712.0 aluminum belongs to the aluminum alloys. There are 25 material properties with values for both materials. Properties with values for just one material (7, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 1.8152 steel and the bottom bar is 712.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 200 to 540
75 to 90
Elastic (Young's, Tensile) Modulus, GPa 190
70
Poisson's Ratio 0.29
0.32
Shear Modulus, GPa 72
27
Tensile Strength: Ultimate (UTS), MPa 660 to 2010
250 to 260

Thermal Properties

Latent Heat of Fusion, J/g 270
380
Maximum Temperature: Mechanical, °C 410
190
Melting Completion (Liquidus), °C 1440
640
Melting Onset (Solidus), °C 1400
610
Specific Heat Capacity, J/kg-K 480
870
Thermal Conductivity, W/m-K 47
160
Thermal Expansion, µm/m-K 13
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.4
40
Electrical Conductivity: Equal Weight (Specific), % IACS 8.6
120

Otherwise Unclassified Properties

Base Metal Price, % relative 2.2
9.5
Density, g/cm3 7.7
3.0
Embodied Carbon, kg CO2/kg material 1.8
8.0
Embodied Energy, MJ/kg 25
150
Embodied Water, L/kg 49
1140

Common Calculations

Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 25
46
Strength to Weight: Axial, points 24 to 72
24 to 25
Strength to Weight: Bending, points 22 to 46
30 to 31
Thermal Diffusivity, mm2/s 13
62
Thermal Shock Resistance, points 20 to 60
11

Alloy Composition

Aluminum (Al), % 0
90.7 to 94
Carbon (C), % 0.51 to 0.59
0
Chromium (Cr), % 0.5 to 0.8
0.4 to 0.6
Copper (Cu), % 0
0 to 0.25
Iron (Fe), % 96 to 97.2
0 to 0.5
Magnesium (Mg), % 0
0.5 to 0.65
Manganese (Mn), % 0.5 to 0.8
0 to 0.1
Phosphorus (P), % 0 to 0.025
0
Silicon (Si), % 1.2 to 1.6
0 to 0.3
Sulfur (S), % 0 to 0.025
0
Titanium (Ti), % 0
0.15 to 0.25
Vanadium (V), % 0.1 to 0.2
0
Zinc (Zn), % 0
5.0 to 6.5
Residuals, % 0
0 to 0.2