MakeItFrom.com
Menu (ESC)

EN 2.4851 Nickel vs. 2014 Aluminum

EN 2.4851 nickel belongs to the nickel alloys classification, while 2014 aluminum belongs to the aluminum alloys. There are 30 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 2.4851 nickel and the bottom bar is 2014 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 200
72
Elongation at Break, % 34
1.5 to 16
Fatigue Strength, MPa 170
90 to 160
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
27
Shear Strength, MPa 430
130 to 290
Tensile Strength: Ultimate (UTS), MPa 650
190 to 500
Tensile Strength: Yield (Proof), MPa 230
100 to 440

Thermal Properties

Latent Heat of Fusion, J/g 320
400
Maximum Temperature: Mechanical, °C 1200
210
Melting Completion (Liquidus), °C 1360
630
Melting Onset (Solidus), °C 1310
510
Specific Heat Capacity, J/kg-K 470
870
Thermal Conductivity, W/m-K 11
150
Thermal Expansion, µm/m-K 14
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 1.4
40
Electrical Conductivity: Equal Weight (Specific), % IACS 1.6
120

Otherwise Unclassified Properties

Base Metal Price, % relative 49
11
Density, g/cm3 8.2
3.0
Embodied Carbon, kg CO2/kg material 8.1
8.1
Embodied Energy, MJ/kg 120
150
Embodied Water, L/kg 280
1130

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 170
6.6 to 56
Resilience: Unit (Modulus of Resilience), kJ/m3 130
76 to 1330
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 23
46
Strength to Weight: Axial, points 22
18 to 46
Strength to Weight: Bending, points 20
25 to 46
Thermal Diffusivity, mm2/s 2.9
58
Thermal Shock Resistance, points 17
8.4 to 22

Alloy Composition

Aluminum (Al), % 1.0 to 1.7
90.4 to 95
Boron (B), % 0 to 0.0060
0
Carbon (C), % 0.030 to 0.1
0
Chromium (Cr), % 21 to 25
0 to 0.1
Copper (Cu), % 0 to 0.5
3.9 to 5.0
Iron (Fe), % 7.7 to 18
0 to 0.7
Magnesium (Mg), % 0
0.2 to 0.8
Manganese (Mn), % 0 to 1.0
0.4 to 1.2
Nickel (Ni), % 58 to 63
0
Phosphorus (P), % 0 to 0.020
0
Silicon (Si), % 0 to 0.5
0.5 to 1.2
Sulfur (S), % 0 to 0.015
0
Titanium (Ti), % 0 to 0.5
0 to 0.15
Zinc (Zn), % 0
0 to 0.25
Zirconium (Zr), % 0
0 to 0.2
Residuals, % 0
0 to 0.15