MakeItFrom.com
Menu (ESC)

EN 2.4851 Nickel vs. 206.0 Aluminum

EN 2.4851 nickel belongs to the nickel alloys classification, while 206.0 aluminum belongs to the aluminum alloys. There are 31 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN 2.4851 nickel and the bottom bar is 206.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 190
95 to 110
Elastic (Young's, Tensile) Modulus, GPa 200
71
Elongation at Break, % 34
8.4 to 12
Fatigue Strength, MPa 170
88 to 210
Poisson's Ratio 0.28
0.33
Shear Modulus, GPa 76
27
Shear Strength, MPa 430
260
Tensile Strength: Ultimate (UTS), MPa 650
330 to 440
Tensile Strength: Yield (Proof), MPa 230
190 to 350

Thermal Properties

Latent Heat of Fusion, J/g 320
390
Maximum Temperature: Mechanical, °C 1200
170
Melting Completion (Liquidus), °C 1360
650
Melting Onset (Solidus), °C 1310
570
Specific Heat Capacity, J/kg-K 470
880
Thermal Conductivity, W/m-K 11
120
Thermal Expansion, µm/m-K 14
19

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 1.4
33
Electrical Conductivity: Equal Weight (Specific), % IACS 1.6
99

Otherwise Unclassified Properties

Base Metal Price, % relative 49
11
Density, g/cm3 8.2
3.0
Embodied Carbon, kg CO2/kg material 8.1
8.0
Embodied Energy, MJ/kg 120
150
Embodied Water, L/kg 280
1150

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 170
24 to 49
Resilience: Unit (Modulus of Resilience), kJ/m3 130
270 to 840
Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 23
46
Strength to Weight: Axial, points 22
30 to 40
Strength to Weight: Bending, points 20
35 to 42
Thermal Diffusivity, mm2/s 2.9
46
Thermal Shock Resistance, points 17
17 to 23

Alloy Composition

Aluminum (Al), % 1.0 to 1.7
93.3 to 95.3
Boron (B), % 0 to 0.0060
0
Carbon (C), % 0.030 to 0.1
0
Chromium (Cr), % 21 to 25
0
Copper (Cu), % 0 to 0.5
4.2 to 5.0
Iron (Fe), % 7.7 to 18
0 to 0.15
Magnesium (Mg), % 0
0.15 to 0.35
Manganese (Mn), % 0 to 1.0
0.2 to 0.5
Nickel (Ni), % 58 to 63
0 to 0.050
Phosphorus (P), % 0 to 0.020
0
Silicon (Si), % 0 to 0.5
0 to 0.1
Sulfur (S), % 0 to 0.015
0
Tin (Sn), % 0
0 to 0.050
Titanium (Ti), % 0 to 0.5
0.15 to 0.3
Zinc (Zn), % 0
0 to 0.1
Residuals, % 0
0 to 0.15