MakeItFrom.com
Menu (ESC)

EN AC-21100 Aluminum vs. EN 1.4980 Stainless Steel

EN AC-21100 aluminum belongs to the aluminum alloys classification, while EN 1.4980 stainless steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN AC-21100 aluminum and the bottom bar is EN 1.4980 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 71
190
Elongation at Break, % 6.2 to 7.3
17
Fatigue Strength, MPa 79 to 87
410
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 27
75
Tensile Strength: Ultimate (UTS), MPa 340 to 350
1030
Tensile Strength: Yield (Proof), MPa 210 to 240
680

Thermal Properties

Latent Heat of Fusion, J/g 390
300
Maximum Temperature: Mechanical, °C 170
920
Melting Completion (Liquidus), °C 670
1430
Melting Onset (Solidus), °C 550
1380
Specific Heat Capacity, J/kg-K 880
470
Thermal Conductivity, W/m-K 130
13
Thermal Expansion, µm/m-K 23
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 34
1.9
Electrical Conductivity: Equal Weight (Specific), % IACS 100
2.1

Otherwise Unclassified Properties

Base Metal Price, % relative 11
26
Density, g/cm3 3.0
7.9
Embodied Carbon, kg CO2/kg material 8.0
6.0
Embodied Energy, MJ/kg 150
87
Embodied Water, L/kg 1150
170

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 19 to 21
150
Resilience: Unit (Modulus of Resilience), kJ/m3 300 to 400
1180
Stiffness to Weight: Axial, points 13
14
Stiffness to Weight: Bending, points 46
24
Strength to Weight: Axial, points 31 to 33
36
Strength to Weight: Bending, points 36 to 37
28
Thermal Diffusivity, mm2/s 48
3.5
Thermal Shock Resistance, points 15
22

Alloy Composition

Aluminum (Al), % 93.4 to 95.7
0 to 0.35
Boron (B), % 0
0.0030 to 0.010
Carbon (C), % 0
0.030 to 0.080
Chromium (Cr), % 0
13.5 to 16
Copper (Cu), % 4.2 to 5.2
0
Iron (Fe), % 0 to 0.19
49.2 to 58.5
Manganese (Mn), % 0 to 0.55
1.0 to 2.0
Molybdenum (Mo), % 0
1.0 to 1.5
Nickel (Ni), % 0
24 to 27
Phosphorus (P), % 0
0 to 0.025
Silicon (Si), % 0 to 0.18
0 to 1.0
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0.15 to 0.3
1.9 to 2.3
Vanadium (V), % 0
0.1 to 0.5
Zinc (Zn), % 0 to 0.070
0
Residuals, % 0 to 0.1
0