EN AC-21100 Aluminum vs. SAE-AISI 1548 Steel
EN AC-21100 aluminum belongs to the aluminum alloys classification, while SAE-AISI 1548 steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is EN AC-21100 aluminum and the bottom bar is SAE-AISI 1548 steel.
Metric UnitsUS Customary Units
Mechanical Properties
Brinell Hardness | 100 to 110 | |
220 to 250 |
Elastic (Young's, Tensile) Modulus, GPa | 71 | |
190 |
Elongation at Break, % | 6.2 to 7.3 | |
11 to 16 |
Fatigue Strength, MPa | 79 to 87 | |
270 to 430 |
Poisson's Ratio | 0.33 | |
0.29 |
Shear Modulus, GPa | 27 | |
72 |
Tensile Strength: Ultimate (UTS), MPa | 340 to 350 | |
730 to 830 |
Tensile Strength: Yield (Proof), MPa | 210 to 240 | |
420 to 690 |
Thermal Properties
Latent Heat of Fusion, J/g | 390 | |
250 |
Maximum Temperature: Mechanical, °C | 170 | |
400 |
Melting Completion (Liquidus), °C | 670 | |
1460 |
Melting Onset (Solidus), °C | 550 | |
1420 |
Specific Heat Capacity, J/kg-K | 880 | |
470 |
Thermal Conductivity, W/m-K | 130 | |
51 |
Thermal Expansion, µm/m-K | 23 | |
12 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 34 | |
7.1 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 100 | |
8.1 |
Otherwise Unclassified Properties
Base Metal Price, % relative | 11 | |
1.8 |
Density, g/cm3 | 3.0 | |
7.8 |
Embodied Carbon, kg CO2/kg material | 8.0 | |
1.4 |
Embodied Energy, MJ/kg | 150 | |
19 |
Embodied Water, L/kg | 1150 | |
47 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 19 to 21 | |
79 to 99 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 300 to 400 | |
470 to 1280 |
Stiffness to Weight: Axial, points | 13 | |
13 |
Stiffness to Weight: Bending, points | 46 | |
24 |
Strength to Weight: Axial, points | 31 to 33 | |
26 to 30 |
Strength to Weight: Bending, points | 36 to 37 | |
23 to 25 |
Thermal Diffusivity, mm2/s | 48 | |
14 |
Thermal Shock Resistance, points | 15 | |
23 to 27 |
Alloy Composition
Aluminum (Al), % | 93.4 to 95.7 | |
0 |
Carbon (C), % | 0 | |
0.44 to 0.52 |
Copper (Cu), % | 4.2 to 5.2 | |
0 |
Iron (Fe), % | 0 to 0.19 | |
98 to 98.5 |
Manganese (Mn), % | 0 to 0.55 | |
1.1 to 1.4 |
Phosphorus (P), % | 0 | |
0 to 0.040 |
Silicon (Si), % | 0 to 0.18 | |
0 |
Sulfur (S), % | 0 | |
0 to 0.050 |
Titanium (Ti), % | 0.15 to 0.3 | |
0 |
Zinc (Zn), % | 0 to 0.070 | |
0 |
Residuals, % | 0 to 0.1 | |
0 |