MakeItFrom.com
Menu (ESC)

EN AC-21200 Aluminum vs. C19000 Copper

EN AC-21200 aluminum belongs to the aluminum alloys classification, while C19000 copper belongs to the copper alloys. There are 28 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN AC-21200 aluminum and the bottom bar is C19000 copper.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 71
120
Elongation at Break, % 3.9 to 6.2
2.5 to 50
Poisson's Ratio 0.33
0.34
Shear Modulus, GPa 27
43
Tensile Strength: Ultimate (UTS), MPa 410 to 440
260 to 760
Tensile Strength: Yield (Proof), MPa 270 to 360
140 to 630

Thermal Properties

Latent Heat of Fusion, J/g 390
210
Maximum Temperature: Mechanical, °C 170
200
Melting Completion (Liquidus), °C 660
1080
Melting Onset (Solidus), °C 550
1040
Specific Heat Capacity, J/kg-K 880
390
Thermal Conductivity, W/m-K 130
250
Thermal Expansion, µm/m-K 23
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 34
60
Electrical Conductivity: Equal Weight (Specific), % IACS 100
61

Otherwise Unclassified Properties

Base Metal Price, % relative 10
31
Density, g/cm3 3.0
8.9
Embodied Carbon, kg CO2/kg material 8.0
2.7
Embodied Energy, MJ/kg 150
42
Embodied Water, L/kg 1150
310

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 16 to 22
18 to 110
Resilience: Unit (Modulus of Resilience), kJ/m3 500 to 930
89 to 1730
Stiffness to Weight: Axial, points 13
7.2
Stiffness to Weight: Bending, points 46
18
Strength to Weight: Axial, points 38 to 40
8.2 to 24
Strength to Weight: Bending, points 41 to 43
10 to 21
Thermal Diffusivity, mm2/s 49
73
Thermal Shock Resistance, points 18 to 19
9.3 to 27

Alloy Composition

Aluminum (Al), % 93.3 to 95.7
0
Copper (Cu), % 4.0 to 5.0
96.9 to 99
Iron (Fe), % 0 to 0.2
0 to 0.1
Lead (Pb), % 0 to 0.030
0 to 0.050
Magnesium (Mg), % 0.15 to 0.5
0
Manganese (Mn), % 0.2 to 0.5
0
Nickel (Ni), % 0 to 0.050
0.9 to 1.3
Phosphorus (P), % 0
0.15 to 0.35
Silicon (Si), % 0 to 0.1
0
Tin (Sn), % 0 to 0.030
0
Titanium (Ti), % 0 to 0.1
0
Zinc (Zn), % 0 to 0.1
0 to 0.8
Residuals, % 0
0 to 0.5