MakeItFrom.com
Menu (ESC)

EN AC-42200 Aluminum vs. ASTM Grade HH Steel

EN AC-42200 aluminum belongs to the aluminum alloys classification, while ASTM grade HH steel belongs to the iron alloys. There are 30 material properties with values for both materials. Properties with values for just one material (2, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN AC-42200 aluminum and the bottom bar is ASTM grade HH steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 89 to 100
170
Elastic (Young's, Tensile) Modulus, GPa 70
200
Elongation at Break, % 3.0 to 6.7
11
Fatigue Strength, MPa 86 to 90
150
Poisson's Ratio 0.33
0.27
Shear Modulus, GPa 26
79
Tensile Strength: Ultimate (UTS), MPa 320
580
Tensile Strength: Yield (Proof), MPa 240 to 260
270

Thermal Properties

Latent Heat of Fusion, J/g 500
310
Maximum Temperature: Mechanical, °C 170
1100
Melting Completion (Liquidus), °C 610
1400
Melting Onset (Solidus), °C 600
1360
Specific Heat Capacity, J/kg-K 910
480
Thermal Conductivity, W/m-K 150
14
Thermal Expansion, µm/m-K 22
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 40
2.1
Electrical Conductivity: Equal Weight (Specific), % IACS 140
2.4

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
20
Density, g/cm3 2.6
7.7
Embodied Carbon, kg CO2/kg material 8.0
3.7
Embodied Energy, MJ/kg 150
53
Embodied Water, L/kg 1110
180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 9.0 to 20
53
Resilience: Unit (Modulus of Resilience), kJ/m3 410 to 490
190
Stiffness to Weight: Axial, points 15
14
Stiffness to Weight: Bending, points 53
25
Strength to Weight: Axial, points 34 to 35
21
Strength to Weight: Bending, points 40 to 41
20
Thermal Diffusivity, mm2/s 66
3.8
Thermal Shock Resistance, points 15
12

Alloy Composition

Aluminum (Al), % 91 to 93.1
0
Carbon (C), % 0
0.2 to 0.5
Chromium (Cr), % 0
24 to 28
Copper (Cu), % 0 to 0.050
0
Iron (Fe), % 0 to 0.19
52.9 to 64.8
Magnesium (Mg), % 0.45 to 0.7
0
Manganese (Mn), % 0 to 0.1
0 to 2.0
Molybdenum (Mo), % 0
0 to 0.5
Nickel (Ni), % 0
11 to 14
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 6.5 to 7.5
0 to 2.0
Sulfur (S), % 0
0 to 0.040
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 0 to 0.070
0
Residuals, % 0 to 0.1
0