MakeItFrom.com
Menu (ESC)

EN AC-45000 Aluminum vs. EN 1.4938 Stainless Steel

EN AC-45000 aluminum belongs to the aluminum alloys classification, while EN 1.4938 stainless steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN AC-45000 aluminum and the bottom bar is EN 1.4938 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 73
200
Elongation at Break, % 1.1
16 to 17
Fatigue Strength, MPa 75
390 to 520
Poisson's Ratio 0.33
0.28
Shear Modulus, GPa 27
76
Tensile Strength: Ultimate (UTS), MPa 180
870 to 1030
Tensile Strength: Yield (Proof), MPa 110
640 to 870

Thermal Properties

Latent Heat of Fusion, J/g 470
270
Maximum Temperature: Mechanical, °C 180
750
Melting Completion (Liquidus), °C 640
1460
Melting Onset (Solidus), °C 520
1420
Specific Heat Capacity, J/kg-K 870
470
Thermal Conductivity, W/m-K 120
30
Thermal Expansion, µm/m-K 22
11

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 27
2.9
Electrical Conductivity: Equal Weight (Specific), % IACS 81
3.3

Otherwise Unclassified Properties

Base Metal Price, % relative 11
10
Density, g/cm3 3.0
7.8
Embodied Carbon, kg CO2/kg material 7.7
3.3
Embodied Energy, MJ/kg 140
47
Embodied Water, L/kg 1070
110

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 1.7
140 to 160
Resilience: Unit (Modulus of Resilience), kJ/m3 80
1050 to 1920
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 47
25
Strength to Weight: Axial, points 17
31 to 37
Strength to Weight: Bending, points 24
26 to 29
Thermal Diffusivity, mm2/s 47
8.1
Thermal Shock Resistance, points 8.0
30 to 35

Alloy Composition

Aluminum (Al), % 82.2 to 91.8
0
Carbon (C), % 0
0.080 to 0.15
Chromium (Cr), % 0 to 0.15
11 to 12.5
Copper (Cu), % 3.0 to 5.0
0
Iron (Fe), % 0 to 1.0
80.5 to 84.8
Lead (Pb), % 0 to 0.3
0
Magnesium (Mg), % 0 to 0.55
0
Manganese (Mn), % 0.2 to 0.65
0.4 to 0.9
Molybdenum (Mo), % 0
1.5 to 2.0
Nickel (Ni), % 0 to 0.45
2.0 to 3.0
Nitrogen (N), % 0
0.020 to 0.040
Phosphorus (P), % 0
0 to 0.025
Silicon (Si), % 5.0 to 7.0
0 to 0.5
Sulfur (S), % 0
0 to 0.015
Tin (Sn), % 0 to 0.15
0
Titanium (Ti), % 0 to 0.25
0
Vanadium (V), % 0
0.25 to 0.4
Zinc (Zn), % 0 to 2.0
0
Residuals, % 0 to 0.35
0