EN AC-45000 Aluminum vs. SAE-AISI T6 Steel
EN AC-45000 aluminum belongs to the aluminum alloys classification, while SAE-AISI T6 steel belongs to the iron alloys. There are 21 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is EN AC-45000 aluminum and the bottom bar is SAE-AISI T6 steel.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 73 | |
210 |
Poisson's Ratio | 0.33 | |
0.29 |
Shear Modulus, GPa | 27 | |
81 |
Tensile Strength: Ultimate (UTS), MPa | 180 | |
880 to 2150 |
Thermal Properties
Latent Heat of Fusion, J/g | 470 | |
250 |
Melting Completion (Liquidus), °C | 640 | |
1830 |
Melting Onset (Solidus), °C | 520 | |
1770 |
Specific Heat Capacity, J/kg-K | 870 | |
400 |
Thermal Conductivity, W/m-K | 120 | |
18 |
Thermal Expansion, µm/m-K | 22 | |
12 |
Otherwise Unclassified Properties
Base Metal Price, % relative | 11 | |
70 |
Density, g/cm3 | 3.0 | |
9.5 |
Embodied Carbon, kg CO2/kg material | 7.7 | |
11 |
Embodied Energy, MJ/kg | 140 | |
170 |
Embodied Water, L/kg | 1070 | |
160 |
Common Calculations
Stiffness to Weight: Axial, points | 14 | |
12 |
Stiffness to Weight: Bending, points | 47 | |
21 |
Strength to Weight: Axial, points | 17 | |
26 to 63 |
Strength to Weight: Bending, points | 24 | |
21 to 39 |
Thermal Diffusivity, mm2/s | 47 | |
4.7 |
Thermal Shock Resistance, points | 8.0 | |
26 to 64 |
Alloy Composition
Aluminum (Al), % | 82.2 to 91.8 | |
0 |
Carbon (C), % | 0 | |
0.75 to 0.85 |
Chromium (Cr), % | 0 to 0.15 | |
4.0 to 4.8 |
Cobalt (Co), % | 0 | |
11 to 13 |
Copper (Cu), % | 3.0 to 5.0 | |
0 to 0.25 |
Iron (Fe), % | 0 to 1.0 | |
55.9 to 63.5 |
Lead (Pb), % | 0 to 0.3 | |
0 |
Magnesium (Mg), % | 0 to 0.55 | |
0 |
Manganese (Mn), % | 0.2 to 0.65 | |
0.2 to 0.4 |
Molybdenum (Mo), % | 0 | |
0.4 to 1.0 |
Nickel (Ni), % | 0 to 0.45 | |
0 to 0.3 |
Phosphorus (P), % | 0 | |
0 to 0.030 |
Silicon (Si), % | 5.0 to 7.0 | |
0.2 to 0.4 |
Sulfur (S), % | 0 | |
0 to 0.030 |
Tin (Sn), % | 0 to 0.15 | |
0 |
Titanium (Ti), % | 0 to 0.25 | |
0 |
Tungsten (W), % | 0 | |
18.5 to 21 |
Vanadium (V), % | 0 | |
1.5 to 2.1 |
Zinc (Zn), % | 0 to 2.0 | |
0 |
Residuals, % | 0 to 0.35 | |
0 |