MakeItFrom.com
Menu (ESC)

EN AC-46300 Aluminum vs. C17300 Copper

EN AC-46300 aluminum belongs to the aluminum alloys classification, while C17300 copper belongs to the copper alloys. There are 27 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN AC-46300 aluminum and the bottom bar is C17300 copper.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 73
120
Elongation at Break, % 1.1
3.0 to 23
Poisson's Ratio 0.33
0.33
Shear Modulus, GPa 27
45
Tensile Strength: Ultimate (UTS), MPa 200
500 to 1380
Tensile Strength: Yield (Proof), MPa 110
160 to 1200

Thermal Properties

Latent Heat of Fusion, J/g 490
230
Maximum Temperature: Mechanical, °C 170
270
Melting Completion (Liquidus), °C 630
980
Melting Onset (Solidus), °C 530
870
Specific Heat Capacity, J/kg-K 880
380
Thermal Conductivity, W/m-K 120
110
Thermal Expansion, µm/m-K 22
17

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 27
22
Electrical Conductivity: Equal Weight (Specific), % IACS 84
23

Otherwise Unclassified Properties

Density, g/cm3 2.9
8.8
Embodied Carbon, kg CO2/kg material 7.7
9.4
Embodied Energy, MJ/kg 140
150
Embodied Water, L/kg 1060
310

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 1.9
40 to 88
Resilience: Unit (Modulus of Resilience), kJ/m3 89
110 to 5410
Stiffness to Weight: Axial, points 14
7.6
Stiffness to Weight: Bending, points 49
19
Strength to Weight: Axial, points 20
16 to 44
Strength to Weight: Bending, points 27
16 to 31
Thermal Diffusivity, mm2/s 47
32
Thermal Shock Resistance, points 9.1
17 to 48

Alloy Composition

Aluminum (Al), % 84 to 90
0 to 0.2
Beryllium (Be), % 0
1.8 to 2.0
Copper (Cu), % 3.0 to 4.0
95.5 to 97.8
Iron (Fe), % 0 to 0.8
0 to 0.4
Lead (Pb), % 0 to 0.15
0.2 to 0.6
Magnesium (Mg), % 0.3 to 0.6
0
Manganese (Mn), % 0.2 to 0.65
0
Nickel (Ni), % 0 to 0.3
0.2 to 0.6
Silicon (Si), % 6.5 to 8.0
0 to 0.2
Tin (Sn), % 0 to 0.1
0
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 0 to 0.65
0
Residuals, % 0
0 to 0.5