MakeItFrom.com
Menu (ESC)

EN AC-51500 Aluminum vs. EN 1.4823 Stainless Steel

EN AC-51500 aluminum belongs to the aluminum alloys classification, while EN 1.4823 stainless steel belongs to the iron alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN AC-51500 aluminum and the bottom bar is EN 1.4823 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 68
200
Elongation at Break, % 5.6
3.4
Fatigue Strength, MPa 120
130
Poisson's Ratio 0.33
0.27
Shear Modulus, GPa 26
79
Tensile Strength: Ultimate (UTS), MPa 280
620
Tensile Strength: Yield (Proof), MPa 160
290

Thermal Properties

Latent Heat of Fusion, J/g 430
320
Maximum Temperature: Mechanical, °C 170
1100
Melting Completion (Liquidus), °C 630
1400
Melting Onset (Solidus), °C 590
1360
Specific Heat Capacity, J/kg-K 910
490
Thermal Conductivity, W/m-K 120
17
Thermal Expansion, µm/m-K 23
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 26
2.0
Electrical Conductivity: Equal Weight (Specific), % IACS 88
2.4

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
16
Density, g/cm3 2.6
7.6
Embodied Carbon, kg CO2/kg material 9.0
3.0
Embodied Energy, MJ/kg 150
43
Embodied Water, L/kg 1150
170

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 13
17
Resilience: Unit (Modulus of Resilience), kJ/m3 190
200
Stiffness to Weight: Axial, points 14
15
Stiffness to Weight: Bending, points 52
26
Strength to Weight: Axial, points 29
23
Strength to Weight: Bending, points 36
21
Thermal Diffusivity, mm2/s 49
4.5
Thermal Shock Resistance, points 13
17

Alloy Composition

Aluminum (Al), % 89.8 to 93.1
0
Carbon (C), % 0
0.3 to 0.5
Chromium (Cr), % 0
25 to 28
Copper (Cu), % 0 to 0.050
0
Iron (Fe), % 0 to 0.25
60.9 to 70.7
Magnesium (Mg), % 4.7 to 6.0
0
Manganese (Mn), % 0.4 to 0.8
0 to 1.5
Molybdenum (Mo), % 0
0 to 0.5
Nickel (Ni), % 0
3.0 to 6.0
Phosphorus (P), % 0
0 to 0.040
Silicon (Si), % 1.8 to 2.6
1.0 to 2.5
Sulfur (S), % 0
0 to 0.030
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 0 to 0.070
0
Residuals, % 0 to 0.15
0