MakeItFrom.com
Menu (ESC)

EN AC-51500 Aluminum vs. EN 1.8062 Steel

EN AC-51500 aluminum belongs to the aluminum alloys classification, while EN 1.8062 steel belongs to the iron alloys. There are 25 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN AC-51500 aluminum and the bottom bar is EN 1.8062 steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 80
200 to 510
Elastic (Young's, Tensile) Modulus, GPa 68
190
Poisson's Ratio 0.33
0.29
Shear Modulus, GPa 26
72
Tensile Strength: Ultimate (UTS), MPa 280
660 to 1910

Thermal Properties

Latent Heat of Fusion, J/g 430
270
Maximum Temperature: Mechanical, °C 170
420
Melting Completion (Liquidus), °C 630
1440
Melting Onset (Solidus), °C 590
1400
Specific Heat Capacity, J/kg-K 910
480
Thermal Conductivity, W/m-K 120
43
Thermal Expansion, µm/m-K 23
13

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 26
7.4
Electrical Conductivity: Equal Weight (Specific), % IACS 88
8.6

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
2.4
Density, g/cm3 2.6
7.7
Embodied Carbon, kg CO2/kg material 9.0
1.5
Embodied Energy, MJ/kg 150
20
Embodied Water, L/kg 1150
49

Common Calculations

Stiffness to Weight: Axial, points 14
13
Stiffness to Weight: Bending, points 52
25
Strength to Weight: Axial, points 29
24 to 69
Strength to Weight: Bending, points 36
22 to 44
Thermal Diffusivity, mm2/s 49
12
Thermal Shock Resistance, points 13
20 to 57

Alloy Composition

Aluminum (Al), % 89.8 to 93.1
0
Carbon (C), % 0
0.42 to 0.5
Chromium (Cr), % 0
0.5 to 0.8
Copper (Cu), % 0 to 0.050
0
Iron (Fe), % 0 to 0.25
95.9 to 97.1
Magnesium (Mg), % 4.7 to 6.0
0
Manganese (Mn), % 0.4 to 0.8
0.5 to 0.8
Molybdenum (Mo), % 0
0.2 to 0.3
Phosphorus (P), % 0
0 to 0.025
Silicon (Si), % 1.8 to 2.6
1.3 to 1.7
Sulfur (S), % 0
0 to 0.025
Titanium (Ti), % 0 to 0.25
0
Zinc (Zn), % 0 to 0.070
0
Residuals, % 0 to 0.15
0