MakeItFrom.com
Menu (ESC)

EN AC-71100 Aluminum vs. EN 1.4307 Stainless Steel

EN AC-71100 aluminum belongs to the aluminum alloys classification, while EN 1.4307 stainless steel belongs to the iron alloys. There are 28 material properties with values for both materials. Properties with values for just one material (6, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN AC-71100 aluminum and the bottom bar is EN 1.4307 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 110
180 to 270
Elastic (Young's, Tensile) Modulus, GPa 72
200
Elongation at Break, % 1.1
14 to 46
Fatigue Strength, MPa 150
190 to 320
Poisson's Ratio 0.32
0.28
Shear Modulus, GPa 27
77
Tensile Strength: Ultimate (UTS), MPa 260
590 to 900
Tensile Strength: Yield (Proof), MPa 230
200 to 570

Thermal Properties

Latent Heat of Fusion, J/g 490
290
Maximum Temperature: Mechanical, °C 170
940
Melting Completion (Liquidus), °C 580
1430
Melting Onset (Solidus), °C 520
1380
Specific Heat Capacity, J/kg-K 860
480
Thermal Expansion, µm/m-K 22
16

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 32
2.4
Electrical Conductivity: Equal Weight (Specific), % IACS 97
2.7

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
15
Density, g/cm3 2.9
7.8
Embodied Carbon, kg CO2/kg material 7.4
3.0
Embodied Energy, MJ/kg 140
43
Embodied Water, L/kg 1010
140

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.8
110 to 210
Resilience: Unit (Modulus of Resilience), kJ/m3 360
100 to 810
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 47
25
Strength to Weight: Axial, points 25
21 to 32
Strength to Weight: Bending, points 31
20 to 27
Thermal Shock Resistance, points 12
13 to 20

Alloy Composition

Aluminum (Al), % 78.7 to 83.3
0
Carbon (C), % 0
0 to 0.030
Chromium (Cr), % 0
17.5 to 19.5
Copper (Cu), % 0 to 0.1
0
Iron (Fe), % 0 to 0.3
66.8 to 74.5
Magnesium (Mg), % 0.2 to 0.5
0
Manganese (Mn), % 0 to 0.15
0 to 2.0
Nickel (Ni), % 0
8.0 to 10.5
Nitrogen (N), % 0
0 to 0.1
Phosphorus (P), % 0
0 to 0.045
Silicon (Si), % 7.5 to 9.5
0 to 1.0
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.15
0
Zinc (Zn), % 9.0 to 10.5
0
Residuals, % 0 to 0.15
0