MakeItFrom.com
Menu (ESC)

EN AC-71100 Aluminum vs. EN 1.4923 Stainless Steel

EN AC-71100 aluminum belongs to the aluminum alloys classification, while EN 1.4923 stainless steel belongs to the iron alloys. There are 27 material properties with values for both materials. Properties with values for just one material (8, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN AC-71100 aluminum and the bottom bar is EN 1.4923 stainless steel.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 72
190
Elongation at Break, % 1.1
12 to 21
Fatigue Strength, MPa 150
300 to 440
Poisson's Ratio 0.32
0.28
Shear Modulus, GPa 27
76
Tensile Strength: Ultimate (UTS), MPa 260
870 to 980
Tensile Strength: Yield (Proof), MPa 230
470 to 780

Thermal Properties

Latent Heat of Fusion, J/g 490
270
Maximum Temperature: Mechanical, °C 170
740
Melting Completion (Liquidus), °C 580
1450
Melting Onset (Solidus), °C 520
1410
Specific Heat Capacity, J/kg-K 860
480
Thermal Expansion, µm/m-K 22
11

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 32
2.9
Electrical Conductivity: Equal Weight (Specific), % IACS 97
3.3

Otherwise Unclassified Properties

Base Metal Price, % relative 9.5
8.0
Density, g/cm3 2.9
7.8
Embodied Carbon, kg CO2/kg material 7.4
2.9
Embodied Energy, MJ/kg 140
41
Embodied Water, L/kg 1010
100

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 2.8
110 to 150
Resilience: Unit (Modulus of Resilience), kJ/m3 360
570 to 1580
Stiffness to Weight: Axial, points 14
14
Stiffness to Weight: Bending, points 47
25
Strength to Weight: Axial, points 25
31 to 35
Strength to Weight: Bending, points 31
26 to 28
Thermal Shock Resistance, points 12
30 to 34

Alloy Composition

Aluminum (Al), % 78.7 to 83.3
0
Carbon (C), % 0
0.18 to 0.24
Chromium (Cr), % 0
11 to 12.5
Copper (Cu), % 0 to 0.1
0
Iron (Fe), % 0 to 0.3
83.5 to 87.1
Magnesium (Mg), % 0.2 to 0.5
0
Manganese (Mn), % 0 to 0.15
0.4 to 0.9
Molybdenum (Mo), % 0
0.8 to 1.2
Nickel (Ni), % 0
0.3 to 0.8
Phosphorus (P), % 0
0 to 0.025
Silicon (Si), % 7.5 to 9.5
0 to 0.5
Sulfur (S), % 0
0 to 0.015
Titanium (Ti), % 0 to 0.15
0
Vanadium (V), % 0
0.25 to 0.35
Zinc (Zn), % 9.0 to 10.5
0
Residuals, % 0 to 0.15
0