MakeItFrom.com
Menu (ESC)

CC331G Bronze vs. 319.0 Aluminum

CC331G bronze belongs to the copper alloys classification, while 319.0 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is CC331G bronze and the bottom bar is 319.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 140
78 to 84
Elastic (Young's, Tensile) Modulus, GPa 110
72
Elongation at Break, % 20
1.8 to 2.0
Poisson's Ratio 0.34
0.33
Shear Modulus, GPa 43
27
Tensile Strength: Ultimate (UTS), MPa 620
190 to 240
Tensile Strength: Yield (Proof), MPa 240
110 to 180

Thermal Properties

Latent Heat of Fusion, J/g 230
480
Maximum Temperature: Mechanical, °C 220
170
Melting Completion (Liquidus), °C 1060
600
Melting Onset (Solidus), °C 1000
540
Specific Heat Capacity, J/kg-K 440
880
Thermal Conductivity, W/m-K 61
110
Thermal Expansion, µm/m-K 18
22

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 13
27
Electrical Conductivity: Equal Weight (Specific), % IACS 14
84

Otherwise Unclassified Properties

Base Metal Price, % relative 28
10
Density, g/cm3 8.3
2.9
Embodied Carbon, kg CO2/kg material 3.2
7.7
Embodied Energy, MJ/kg 53
140
Embodied Water, L/kg 390
1080

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 97
3.3 to 3.9
Resilience: Unit (Modulus of Resilience), kJ/m3 250
88 to 220
Stiffness to Weight: Axial, points 7.6
14
Stiffness to Weight: Bending, points 19
48
Strength to Weight: Axial, points 21
18 to 24
Strength to Weight: Bending, points 19
25 to 30
Thermal Diffusivity, mm2/s 17
44
Thermal Shock Resistance, points 22
8.6 to 11

Alloy Composition

Aluminum (Al), % 8.5 to 10.5
85.8 to 91.5
Copper (Cu), % 83 to 86.5
3.0 to 4.0
Iron (Fe), % 1.5 to 3.5
0 to 1.0
Lead (Pb), % 0 to 0.1
0
Magnesium (Mg), % 0 to 0.050
0 to 0.1
Manganese (Mn), % 0 to 1.0
0 to 0.5
Nickel (Ni), % 0 to 1.5
0 to 0.35
Silicon (Si), % 0 to 0.2
5.5 to 6.5
Tin (Sn), % 0 to 0.2
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 0 to 0.5
0 to 1.0
Residuals, % 0
0 to 0.5