MakeItFrom.com
Menu (ESC)

CC750S Brass vs. 6105 Aluminum

CC750S brass belongs to the copper alloys classification, while 6105 aluminum belongs to the aluminum alloys. There are 28 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is CC750S brass and the bottom bar is 6105 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 110
68
Elongation at Break, % 13
9.0 to 16
Poisson's Ratio 0.31
0.33
Shear Modulus, GPa 40
26
Tensile Strength: Ultimate (UTS), MPa 200
190 to 280
Tensile Strength: Yield (Proof), MPa 80
120 to 270

Thermal Properties

Latent Heat of Fusion, J/g 170
410
Maximum Temperature: Mechanical, °C 130
160
Melting Completion (Liquidus), °C 860
650
Melting Onset (Solidus), °C 810
600
Specific Heat Capacity, J/kg-K 380
900
Thermal Conductivity, W/m-K 110
180 to 190
Thermal Expansion, µm/m-K 20
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 24
46 to 50
Electrical Conductivity: Equal Weight (Specific), % IACS 26
150 to 170

Otherwise Unclassified Properties

Base Metal Price, % relative 25
9.5
Density, g/cm3 8.2
2.7
Embodied Carbon, kg CO2/kg material 2.8
8.3
Embodied Energy, MJ/kg 46
150
Embodied Water, L/kg 330
1180

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 22
25 to 27
Resilience: Unit (Modulus of Resilience), kJ/m3 30
100 to 550
Stiffness to Weight: Axial, points 7.1
14
Stiffness to Weight: Bending, points 19
51
Strength to Weight: Axial, points 6.8
20 to 29
Strength to Weight: Bending, points 9.3
28 to 35
Thermal Diffusivity, mm2/s 35
72 to 79
Thermal Shock Resistance, points 6.7
8.6 to 12

Alloy Composition

Aluminum (Al), % 0 to 0.1
97.2 to 99
Chromium (Cr), % 0
0 to 0.1
Copper (Cu), % 62 to 67
0 to 0.1
Iron (Fe), % 0 to 0.8
0 to 0.35
Lead (Pb), % 1.0 to 3.0
0
Magnesium (Mg), % 0
0.45 to 0.8
Manganese (Mn), % 0 to 0.2
0 to 0.1
Nickel (Ni), % 0 to 1.0
0
Phosphorus (P), % 0 to 0.050
0
Silicon (Si), % 0 to 0.050
0.6 to 1.0
Tin (Sn), % 0 to 1.5
0
Titanium (Ti), % 0
0 to 0.1
Zinc (Zn), % 26.3 to 36
0 to 0.1
Residuals, % 0
0 to 0.15