MakeItFrom.com
Menu (ESC)

CC754S Brass vs. EN AC-41000 Aluminum

CC754S brass belongs to the copper alloys classification, while EN AC-41000 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is CC754S brass and the bottom bar is EN AC-41000 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 90
57 to 97
Elastic (Young's, Tensile) Modulus, GPa 100
69
Elongation at Break, % 11
4.5
Poisson's Ratio 0.31
0.33
Shear Modulus, GPa 40
26
Tensile Strength: Ultimate (UTS), MPa 320
170 to 280
Tensile Strength: Yield (Proof), MPa 160
80 to 210

Thermal Properties

Latent Heat of Fusion, J/g 170
420
Maximum Temperature: Mechanical, °C 120
170
Melting Completion (Liquidus), °C 830
640
Melting Onset (Solidus), °C 780
630
Specific Heat Capacity, J/kg-K 390
900
Thermal Conductivity, W/m-K 95
170
Thermal Expansion, µm/m-K 21
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 27
38
Electrical Conductivity: Equal Weight (Specific), % IACS 30
130

Otherwise Unclassified Properties

Base Metal Price, % relative 23
9.5
Density, g/cm3 8.1
2.7
Embodied Carbon, kg CO2/kg material 2.8
8.2
Embodied Energy, MJ/kg 47
150
Embodied Water, L/kg 330
1160

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 29
6.4 to 11
Resilience: Unit (Modulus of Resilience), kJ/m3 130
46 to 300
Stiffness to Weight: Axial, points 7.2
14
Stiffness to Weight: Bending, points 19
51
Strength to Weight: Axial, points 11
18 to 29
Strength to Weight: Bending, points 13
26 to 35
Thermal Diffusivity, mm2/s 31
69
Thermal Shock Resistance, points 10
7.8 to 13

Alloy Composition

Aluminum (Al), % 0 to 0.8
95.2 to 97.6
Copper (Cu), % 57 to 63
0 to 0.1
Iron (Fe), % 0 to 0.7
0 to 0.6
Lead (Pb), % 0.5 to 2.5
0 to 0.050
Magnesium (Mg), % 0
0.45 to 0.65
Manganese (Mn), % 0 to 0.5
0.3 to 0.5
Nickel (Ni), % 0 to 1.0
0 to 0.050
Phosphorus (P), % 0 to 0.020
0
Silicon (Si), % 0 to 0.3
1.6 to 2.4
Tin (Sn), % 0 to 1.0
0 to 0.050
Titanium (Ti), % 0
0.050 to 0.2
Zinc (Zn), % 30.2 to 42.5
0 to 0.1
Residuals, % 0
0 to 0.15