MakeItFrom.com
Menu (ESC)

CC760S Brass vs. 295.0 Aluminum

CC760S brass belongs to the copper alloys classification, while 295.0 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (3, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is CC760S brass and the bottom bar is 295.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 51
60 to 93
Elastic (Young's, Tensile) Modulus, GPa 110
71
Elongation at Break, % 22
2.0 to 7.2
Poisson's Ratio 0.33
0.33
Shear Modulus, GPa 42
27
Tensile Strength: Ultimate (UTS), MPa 180
230 to 280
Tensile Strength: Yield (Proof), MPa 80
100 to 220

Thermal Properties

Latent Heat of Fusion, J/g 190
400
Maximum Temperature: Mechanical, °C 170
170
Melting Completion (Liquidus), °C 1000
640
Melting Onset (Solidus), °C 940
530
Specific Heat Capacity, J/kg-K 390
880
Thermal Conductivity, W/m-K 150
140
Thermal Expansion, µm/m-K 19
23

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 38
35
Electrical Conductivity: Equal Weight (Specific), % IACS 40
100

Otherwise Unclassified Properties

Base Metal Price, % relative 28
10
Density, g/cm3 8.6
3.0
Embodied Carbon, kg CO2/kg material 2.6
7.9
Embodied Energy, MJ/kg 43
150
Embodied Water, L/kg 320
1140

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 33
5.2 to 13
Resilience: Unit (Modulus of Resilience), kJ/m3 29
77 to 340
Stiffness to Weight: Axial, points 7.2
13
Stiffness to Weight: Bending, points 19
46
Strength to Weight: Axial, points 5.8
21 to 26
Strength to Weight: Bending, points 8.2
27 to 32
Thermal Diffusivity, mm2/s 45
54
Thermal Shock Resistance, points 6.2
9.8 to 12

Alloy Composition

Aluminum (Al), % 0 to 0.010
91.4 to 95.3
Arsenic (As), % 0.050 to 0.15
0
Copper (Cu), % 83 to 88
4.0 to 5.0
Iron (Fe), % 0 to 0.15
0 to 1.0
Lead (Pb), % 0 to 0.5
0
Magnesium (Mg), % 0
0 to 0.030
Manganese (Mn), % 0 to 0.1
0 to 0.35
Nickel (Ni), % 0 to 0.1
0
Silicon (Si), % 0 to 0.020
0.7 to 1.5
Tin (Sn), % 0 to 0.3
0
Titanium (Ti), % 0
0 to 0.25
Zinc (Zn), % 10.7 to 17
0 to 0.35
Residuals, % 0
0 to 0.15