MakeItFrom.com
Menu (ESC)

CC760S Brass vs. 90-platinum 10-iridium

CC760S brass belongs to the copper alloys classification, while 90-platinum 10-iridium belongs to the otherwise unclassified metals. There are 14 material properties with values for both materials. Properties with values for just one material (16, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is CC760S brass and the bottom bar is 90-platinum 10-iridium.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 110
200
Elongation at Break, % 22
5.5 to 34
Poisson's Ratio 0.33
0.38
Shear Modulus, GPa 42
74
Tensile Strength: Ultimate (UTS), MPa 180
330 to 550

Thermal Properties

Latent Heat of Fusion, J/g 190
100
Specific Heat Capacity, J/kg-K 390
130
Thermal Expansion, µm/m-K 19
8.6

Otherwise Unclassified Properties

Density, g/cm3 8.6
22

Common Calculations

Stiffness to Weight: Axial, points 7.2
5.3
Stiffness to Weight: Bending, points 19
9.1
Strength to Weight: Axial, points 5.8
4.2 to 7.1
Strength to Weight: Bending, points 8.2
4.9 to 6.9
Thermal Shock Resistance, points 6.2
13 to 22

Alloy Composition

Aluminum (Al), % 0 to 0.010
0
Arsenic (As), % 0.050 to 0.15
0
Copper (Cu), % 83 to 88
0
Iridium (Ir), % 0
9.5 to 10.5
Iron (Fe), % 0 to 0.15
0
Lead (Pb), % 0 to 0.5
0
Manganese (Mn), % 0 to 0.1
0
Nickel (Ni), % 0 to 0.1
0
Platinum (Pt), % 0
89.3 to 90.5
Silicon (Si), % 0 to 0.020
0
Tin (Sn), % 0 to 0.3
0
Zinc (Zn), % 10.7 to 17
0
Residuals, % 0
0 to 0.2