MakeItFrom.com
Menu (ESC)

CC760S Brass vs. EN AC-43100 Aluminum

CC760S brass belongs to the copper alloys classification, while EN AC-43100 aluminum belongs to the aluminum alloys. There are 29 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is CC760S brass and the bottom bar is EN AC-43100 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 51
60 to 94
Elastic (Young's, Tensile) Modulus, GPa 110
71
Elongation at Break, % 22
1.1 to 2.5
Poisson's Ratio 0.33
0.33
Shear Modulus, GPa 42
27
Tensile Strength: Ultimate (UTS), MPa 180
180 to 270
Tensile Strength: Yield (Proof), MPa 80
97 to 230

Thermal Properties

Latent Heat of Fusion, J/g 190
540
Maximum Temperature: Mechanical, °C 170
170
Melting Completion (Liquidus), °C 1000
600
Melting Onset (Solidus), °C 940
590
Specific Heat Capacity, J/kg-K 390
900
Thermal Conductivity, W/m-K 150
140
Thermal Expansion, µm/m-K 19
22

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 38
37
Electrical Conductivity: Equal Weight (Specific), % IACS 40
130

Otherwise Unclassified Properties

Base Metal Price, % relative 28
9.5
Density, g/cm3 8.6
2.6
Embodied Carbon, kg CO2/kg material 2.6
7.8
Embodied Energy, MJ/kg 43
150
Embodied Water, L/kg 320
1070

Common Calculations

Resilience: Ultimate (Unit Rupture Work), MJ/m3 33
2.9 to 5.7
Resilience: Unit (Modulus of Resilience), kJ/m3 29
66 to 360
Stiffness to Weight: Axial, points 7.2
15
Stiffness to Weight: Bending, points 19
54
Strength to Weight: Axial, points 5.8
20 to 29
Strength to Weight: Bending, points 8.2
28 to 36
Thermal Diffusivity, mm2/s 45
60
Thermal Shock Resistance, points 6.2
8.6 to 12

Alloy Composition

Aluminum (Al), % 0 to 0.010
86.9 to 90.8
Arsenic (As), % 0.050 to 0.15
0
Copper (Cu), % 83 to 88
0 to 0.1
Iron (Fe), % 0 to 0.15
0 to 0.55
Lead (Pb), % 0 to 0.5
0 to 0.050
Magnesium (Mg), % 0
0.2 to 0.45
Manganese (Mn), % 0 to 0.1
0 to 0.45
Nickel (Ni), % 0 to 0.1
0 to 0.050
Silicon (Si), % 0 to 0.020
9.0 to 11
Tin (Sn), % 0 to 0.3
0 to 0.050
Titanium (Ti), % 0
0 to 0.15
Zinc (Zn), % 10.7 to 17
0 to 0.1
Residuals, % 0
0 to 0.15