MakeItFrom.com
Menu (ESC)

EN-MC65210 Magnesium vs. 60Pd-40Ag Alloy

EN-MC65210 magnesium belongs to the magnesium alloys classification, while 60Pd-40Ag alloy belongs to the otherwise unclassified metals. There are 21 material properties with values for both materials. Properties with values for just one material (9, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN-MC65210 magnesium and the bottom bar is 60Pd-40Ag alloy.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 44
100
Elongation at Break, % 2.8
1.1 to 28
Poisson's Ratio 0.29
0.38
Shear Modulus, GPa 17
37
Shear Strength, MPa 150
220 to 350
Tensile Strength: Ultimate (UTS), MPa 270
340 to 720

Thermal Properties

Latent Heat of Fusion, J/g 340
140
Melting Completion (Liquidus), °C 610
1360
Melting Onset (Solidus), °C 540
1310
Specific Heat Capacity, J/kg-K 970
240
Thermal Conductivity, W/m-K 110
29
Thermal Expansion, µm/m-K 26
15

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 25
4.1
Electrical Conductivity: Equal Weight (Specific), % IACS 110
3.2

Otherwise Unclassified Properties

Density, g/cm3 2.0
11

Common Calculations

Stiffness to Weight: Axial, points 12
4.9
Stiffness to Weight: Bending, points 59
14
Strength to Weight: Axial, points 38
8.4 to 18
Strength to Weight: Bending, points 47
9.6 to 16
Thermal Diffusivity, mm2/s 58
11
Thermal Shock Resistance, points 17
16 to 34

Alloy Composition

Copper (Cu), % 0 to 0.030
0 to 0.1
Iron (Fe), % 0 to 0.010
0
Magnesium (Mg), % 92.6 to 95.6
0
Manganese (Mn), % 0 to 0.15
0
Nickel (Ni), % 0 to 0.0050
0
Palladium (Pd), % 0
59.5 to 60.9
Silicon (Si), % 0 to 0.010
0
Silver (Ag), % 2.0 to 3.0
39.1 to 40.5
Unspecified Rare Earths, % 2.0 to 3.0
0
Zinc (Zn), % 0 to 0.2
0
Zirconium (Zr), % 0.4 to 1.0
0
Residuals, % 0
0 to 0.3