MakeItFrom.com
Menu (ESC)

EN-MC95310 Magnesium vs. 60Pd-40Ag Alloy

EN-MC95310 magnesium belongs to the magnesium alloys classification, while 60Pd-40Ag alloy belongs to the otherwise unclassified metals. There are 21 material properties with values for both materials. Properties with values for just one material (11, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EN-MC95310 magnesium and the bottom bar is 60Pd-40Ag alloy.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 45
100
Elongation at Break, % 2.2
1.1 to 28
Poisson's Ratio 0.29
0.38
Shear Modulus, GPa 17
37
Shear Strength, MPa 160
220 to 350
Tensile Strength: Ultimate (UTS), MPa 280
340 to 720

Thermal Properties

Latent Heat of Fusion, J/g 330
140
Melting Completion (Liquidus), °C 650
1360
Melting Onset (Solidus), °C 540
1310
Specific Heat Capacity, J/kg-K 960
240
Thermal Conductivity, W/m-K 51
29
Thermal Expansion, µm/m-K 25
15

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 11
4.1
Electrical Conductivity: Equal Weight (Specific), % IACS 50
3.2

Otherwise Unclassified Properties

Density, g/cm3 1.9
11

Common Calculations

Stiffness to Weight: Axial, points 13
4.9
Stiffness to Weight: Bending, points 61
14
Strength to Weight: Axial, points 40
8.4 to 18
Strength to Weight: Bending, points 49
9.6 to 16
Thermal Diffusivity, mm2/s 28
11
Thermal Shock Resistance, points 18
16 to 34

Alloy Composition

Copper (Cu), % 0 to 0.030
0 to 0.1
Iron (Fe), % 0 to 0.010
0
Lithium (Li), % 0 to 0.2
0
Magnesium (Mg), % 88.9 to 93.4
0
Manganese (Mn), % 0 to 0.15
0
Nickel (Ni), % 0 to 0.0050
0
Palladium (Pd), % 0
59.5 to 60.9
Silicon (Si), % 0 to 0.010
0
Silver (Ag), % 0
39.1 to 40.5
Unspecified Rare Earths, % 1.5 to 4.0
0
Yttrium (Y), % 4.8 to 5.5
0
Zinc (Zn), % 0 to 0.2
0
Zirconium (Zr), % 0.4 to 1.0
0
Residuals, % 0
0 to 0.3