EV31A Magnesium vs. EN 1.6579 Steel
EV31A magnesium belongs to the magnesium alloys classification, while EN 1.6579 steel belongs to the iron alloys. There are 24 material properties with values for both materials. Properties with values for just one material (11, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is EV31A magnesium and the bottom bar is EN 1.6579 steel.
Metric UnitsUS Customary Units
Mechanical Properties
Brinell Hardness | 70 | |
260 to 290 |
Elastic (Young's, Tensile) Modulus, GPa | 44 | |
190 |
Elongation at Break, % | 3.5 | |
11 to 14 |
Fatigue Strength, MPa | 120 | |
380 to 570 |
Poisson's Ratio | 0.27 | |
0.29 |
Shear Modulus, GPa | 17 | |
73 |
Tensile Strength: Ultimate (UTS), MPa | 260 | |
850 to 980 |
Tensile Strength: Yield (Proof), MPa | 170 | |
600 to 910 |
Thermal Properties
Maximum Temperature: Mechanical, °C | 200 | |
440 |
Melting Onset (Solidus), °C | 590 | |
1410 |
Specific Heat Capacity, J/kg-K | 1000 | |
470 |
Thermal Conductivity, W/m-K | 86 | |
39 |
Thermal Expansion, µm/m-K | 27 | |
13 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 18 | |
7.7 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 90 | |
8.8 |
Otherwise Unclassified Properties
Density, g/cm3 | 1.8 | |
7.8 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 8.1 | |
100 to 120 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 330 | |
950 to 2210 |
Stiffness to Weight: Axial, points | 13 | |
13 |
Stiffness to Weight: Bending, points | 65 | |
24 |
Strength to Weight: Axial, points | 40 | |
30 to 35 |
Strength to Weight: Bending, points | 50 | |
25 to 28 |
Thermal Diffusivity, mm2/s | 47 | |
11 |
Thermal Shock Resistance, points | 16 | |
25 to 29 |