EV31A Magnesium vs. Grade 360 Molybdenum
EV31A magnesium belongs to the magnesium alloys classification, while grade 360 molybdenum belongs to the otherwise unclassified metals. There are 16 material properties with values for both materials. Properties with values for just one material (15, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is EV31A magnesium and the bottom bar is grade 360 molybdenum.
Metric UnitsUS Customary Units
Mechanical Properties
| Elastic (Young's, Tensile) Modulus, GPa | 44 | |
| 310 |
| Elongation at Break, % | 3.5 | |
| 6.3 to 17 |
| Poisson's Ratio | 0.27 | |
| 0.31 |
| Shear Modulus, GPa | 17 | |
| 120 |
| Tensile Strength: Ultimate (UTS), MPa | 260 | |
| 430 to 620 |
| Tensile Strength: Yield (Proof), MPa | 170 | |
| 270 to 530 |
Thermal Properties
| Specific Heat Capacity, J/kg-K | 1000 | |
| 250 |
| Thermal Expansion, µm/m-K | 27 | |
| 7.0 |
Otherwise Unclassified Properties
| Density, g/cm3 | 1.8 | |
| 10 |
Common Calculations
| Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 8.1 | |
| 37 to 64 |
| Resilience: Unit (Modulus of Resilience), kJ/m3 | 330 | |
| 120 to 450 |
| Stiffness to Weight: Axial, points | 13 | |
| 17 |
| Stiffness to Weight: Bending, points | 65 | |
| 22 |
| Strength to Weight: Axial, points | 40 | |
| 12 to 17 |
| Strength to Weight: Bending, points | 50 | |
| 12 to 16 |
| Thermal Shock Resistance, points | 16 | |
| 14 to 21 |