EV31A Magnesium vs. SAE-AISI D2 Steel
EV31A magnesium belongs to the magnesium alloys classification, while SAE-AISI D2 steel belongs to the iron alloys. There are 23 material properties with values for both materials. Properties with values for just one material (11, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.
For each property being compared, the top bar is EV31A magnesium and the bottom bar is SAE-AISI D2 steel.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 44 | |
190 |
Elongation at Break, % | 3.5 | |
5.0 to 16 |
Fatigue Strength, MPa | 120 | |
310 to 860 |
Poisson's Ratio | 0.27 | |
0.28 |
Shear Modulus, GPa | 17 | |
75 |
Shear Strength, MPa | 170 | |
460 to 1160 |
Tensile Strength: Ultimate (UTS), MPa | 260 | |
760 to 2000 |
Tensile Strength: Yield (Proof), MPa | 170 | |
470 to 1510 |
Thermal Properties
Melting Onset (Solidus), °C | 590 | |
1390 |
Specific Heat Capacity, J/kg-K | 1000 | |
480 |
Thermal Conductivity, W/m-K | 86 | |
31 |
Thermal Expansion, µm/m-K | 27 | |
11 |
Electrical Properties
Electrical Conductivity: Equal Volume, % IACS | 18 | |
4.3 |
Electrical Conductivity: Equal Weight (Specific), % IACS | 90 | |
5.1 |
Otherwise Unclassified Properties
Density, g/cm3 | 1.8 | |
7.7 |
Common Calculations
Resilience: Ultimate (Unit Rupture Work), MJ/m3 | 8.1 | |
92 to 100 |
Resilience: Unit (Modulus of Resilience), kJ/m3 | 330 | |
570 to 5940 |
Stiffness to Weight: Axial, points | 13 | |
14 |
Stiffness to Weight: Bending, points | 65 | |
25 |
Strength to Weight: Axial, points | 40 | |
27 to 72 |
Strength to Weight: Bending, points | 50 | |
24 to 46 |
Thermal Diffusivity, mm2/s | 47 | |
8.3 |
Thermal Shock Resistance, points | 16 | |
25 to 67 |