MakeItFrom.com
Menu (ESC)

EZ33A Magnesium vs. C35300 Brass

EZ33A magnesium belongs to the magnesium alloys classification, while C35300 brass belongs to the copper alloys. There are 24 material properties with values for both materials. Properties with values for just one material (11, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is EZ33A magnesium and the bottom bar is C35300 brass.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 44
100
Poisson's Ratio 0.29
0.31
Shear Modulus, GPa 17
39
Tensile Strength: Ultimate (UTS), MPa 150
340 to 650

Thermal Properties

Latent Heat of Fusion, J/g 330
170
Maximum Temperature: Mechanical, °C 250
120
Melting Completion (Liquidus), °C 640
910
Melting Onset (Solidus), °C 570
890
Specific Heat Capacity, J/kg-K 970
380
Thermal Conductivity, W/m-K 100
120
Thermal Expansion, µm/m-K 27
21

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 24
26
Electrical Conductivity: Equal Weight (Specific), % IACS 110
29

Otherwise Unclassified Properties

Base Metal Price, % relative 25
23
Density, g/cm3 1.9
8.1
Embodied Carbon, kg CO2/kg material 25
2.6
Embodied Energy, MJ/kg 190
45
Embodied Water, L/kg 930
320

Common Calculations

Stiffness to Weight: Axial, points 13
7.1
Stiffness to Weight: Bending, points 61
19
Strength to Weight: Axial, points 22
12 to 22
Strength to Weight: Bending, points 33
13 to 21
Thermal Diffusivity, mm2/s 54
38
Thermal Shock Resistance, points 9.2
11 to 22

Alloy Composition

Copper (Cu), % 0 to 0.1
60 to 63
Iron (Fe), % 0
0 to 0.1
Lead (Pb), % 0
1.5 to 2.5
Magnesium (Mg), % 91.5 to 95
0
Nickel (Ni), % 0 to 0.010
0
Unspecified Rare Earths, % 2.5 to 4.0
0
Zinc (Zn), % 2.0 to 3.1
33.9 to 38.5
Zirconium (Zr), % 0.5 to 1.0
0
Residuals, % 0
0 to 0.5