EPDM Rubber vs. LCP
EPDM rubber belongs to the thermoset elastomers (rubber) classification, while LCP belongs to the thermoplastics. There are 7 material properties with values for both materials. Properties with values for just one material (12, in this case) are not shown.
For each property being compared, the top bar is EPDM rubber and the bottom bar is LCP.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 1.0 | |
| 1.4 to 1.6 |
| Elongation at Break, % | 400 | |
| 1.0 to 3.0 |
| Maximum Temperature: Decomposition, °C | 290 | |
| 520 |
| Specific Heat Capacity, J/kg-K | 2000 | |
| 1020 to 1200 |
| Strength to Weight: Axial, points | 3.6 | |
| 33 to 43 |
| Strength to Weight: Bending, points | 12 | |
| 45 to 56 |
| Tensile Strength: Ultimate (UTS), MPa | 13 | |
| 180 to 230 |