EPDM Rubber vs. PA 6/10

EPDM rubber belongs to the thermoset elastomers (rubber) classification, while PA 6/10 belongs to the thermoplastics. There are 10 material properties with values for both materials. Properties with values for just one material (12, in this case) are not shown.

For each property being compared, the top bar is EPDM rubber and the bottom bar is PA 6/10.

Ethylene Propylene Diene Rubber (EPDM, EPT)Polyamide (PA, Nylon) 6/10 (610)

Metric UnitsUS Customary Units

Material Properties

Density, g/cm³		1.0
Density, g/cm³		1.1

Elongation at Break, %		400
Elongation at Break, %		110 to 120

Maximum Temperature: Decomposition, °C		290
Maximum Temperature: Decomposition, °C		440

Maximum Temperature: Mechanical, °C		160
Maximum Temperature: Mechanical, °C		80

Specific Heat Capacity, J/kg-K		2000
Specific Heat Capacity, J/kg-K		1510

Strength to Weight: Axial, points		3.6
Strength to Weight: Axial, points		11 to 15

Strength to Weight: Bending, points		12
Strength to Weight: Bending, points		25 to 30

Tensile Strength: Ultimate (UTS), MPa		13
Tensile Strength: Ultimate (UTS), MPa		45 to 60

Thermal Conductivity, W/m-K		0.2
Thermal Conductivity, W/m-K		0.23

Thermal Diffusivity, mm²/s		0.1
Thermal Diffusivity, mm²/s		0.13

EPDM Rubber vs. PA 6/10

Material Properties

Find Materials

Table of Contents