FEP vs. PMMA
Both FEP and PMMA are thermoplastics. There are 22 material properties with values for both materials. Properties with values for just one material (14, in this case) are not shown.
For each property being compared, the top bar is FEP and the bottom bar is PMMA.
Metric UnitsUS Customary Units
Mechanical Properties
Elastic (Young's, Tensile) Modulus, GPa | 0.43 | |
3.2 |
Elongation at Break, % | 300 | |
4.0 |
Flexural Strength, MPa | 24 | |
110 |
Tensile Strength: Ultimate (UTS), MPa | 20 | |
71 |
Thermal Properties
Glass Transition Temperature, °C | 60 | |
110 |
Heat Deflection Temperature At 1.82 MPa (264 psi), °C | 50 | |
96 |
Maximum Temperature: Autoignition, °C | 630 | |
320 |
Melting Onset (Solidus), °C | 260 | |
180 |
Specific Heat Capacity, J/kg-K | 1170 | |
1260 |
Thermal Conductivity, W/m-K | 0.22 | |
0.19 |
Thermal Expansion, µm/m-K | 95 | |
76 |
Electrical Properties
Dielectric Constant (Relative Permittivity) At 1 Hz | 1.9 | |
3.6 |
Dielectric Strength (Breakdown Potential), kV/mm | 22 | |
30 |
Otherwise Unclassified Properties
Density, g/cm3 | 2.1 | |
1.2 |
Limiting Oxygen Index (LOI), % | 80 | |
17 |
Refractive Index | 1.4 | |
1.5 |
Common Calculations
Stiffness to Weight: Axial, points | 0.11 | |
1.5 |
Stiffness to Weight: Bending, points | 12 | |
42 |
Strength to Weight: Axial, points | 2.6 | |
17 |
Strength to Weight: Bending, points | 7.6 | |
32 |
Thermal Diffusivity, mm2/s | 0.088 | |
0.13 |
Thermal Shock Resistance, points | 35 | |
21 |