MakeItFrom.com
Menu (ESC)

Grade FDSiCrV Steel vs. 771.0 Aluminum

Grade FDSiCrV steel belongs to the iron alloys classification, while 771.0 aluminum belongs to the aluminum alloys. There are 25 material properties with values for both materials. Properties with values for just one material (7, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is grade FDSiCrV steel and the bottom bar is 771.0 aluminum.

Metric UnitsUS Customary Units

Mechanical Properties

Brinell Hardness 630
85 to 120
Elastic (Young's, Tensile) Modulus, GPa 190
70
Poisson's Ratio 0.29
0.32
Shear Modulus, GPa 80
26
Tensile Strength: Ultimate (UTS), MPa 2100
250 to 370

Thermal Properties

Latent Heat of Fusion, J/g 270
380
Maximum Temperature: Mechanical, °C 420
180
Melting Completion (Liquidus), °C 1440
630
Melting Onset (Solidus), °C 1400
620
Specific Heat Capacity, J/kg-K 480
870
Thermal Conductivity, W/m-K 47
140 to 150
Thermal Expansion, µm/m-K 13
24

Electrical Properties

Electrical Conductivity: Equal Volume, % IACS 7.4
27
Electrical Conductivity: Equal Weight (Specific), % IACS 8.6
82

Otherwise Unclassified Properties

Base Metal Price, % relative 2.3
9.5
Density, g/cm3 7.7
3.0
Embodied Carbon, kg CO2/kg material 1.9
8.0
Embodied Energy, MJ/kg 26
150
Embodied Water, L/kg 50
1130

Common Calculations

Stiffness to Weight: Axial, points 13
13
Stiffness to Weight: Bending, points 25
46
Strength to Weight: Axial, points 75
23 to 35
Strength to Weight: Bending, points 47
29 to 39
Thermal Diffusivity, mm2/s 13
54 to 58
Thermal Shock Resistance, points 63
11 to 16

Alloy Composition

Aluminum (Al), % 0
90.5 to 92.5
Carbon (C), % 0.5 to 0.7
0
Chromium (Cr), % 0.5 to 1.0
0.060 to 0.2
Copper (Cu), % 0 to 0.12
0 to 0.1
Iron (Fe), % 96 to 97.8
0 to 0.15
Magnesium (Mg), % 0
0.8 to 1.0
Manganese (Mn), % 0.4 to 0.9
0 to 0.1
Phosphorus (P), % 0 to 0.030
0
Silicon (Si), % 1.2 to 1.7
0 to 0.15
Sulfur (S), % 0 to 0.025
0
Titanium (Ti), % 0
0.1 to 0.2
Vanadium (V), % 0.1 to 0.25
0
Zinc (Zn), % 0
6.5 to 7.5
Residuals, % 0
0 to 0.15