HMWPE vs. ABS
Both HMWPE and ABS are thermoplastics. There are 9 material properties with values for both materials. Properties with values for just one material (9, in this case) are not shown.
For each property being compared, the top bar is HMWPE and the bottom bar is ABS.
Metric UnitsUS Customary Units
Material Properties
| Density, g/cm3 | 0.95 | |
| 1.0 to 1.4 |
| Dielectric Constant (Relative Permittivity) At 1 Hz | 2.3 | |
| 3.1 to 3.2 |
| Elastic (Young's, Tensile) Modulus, GPa | 0.7 | |
| 2.0 to 2.6 |
| Heat Deflection Temperature At 455 kPa (66 psi), °C | 75 | |
| 83 to 110 |
| Stiffness to Weight: Axial, points | 0.41 | |
| 0.79 to 1.4 |
| Stiffness to Weight: Bending, points | 31 | |
| 30 to 44 |
| Strength to Weight: Axial, points | 5.0 | |
| 10 to 22 |
| Strength to Weight: Bending, points | 16 | |
| 24 to 37 |
| Tensile Strength: Ultimate (UTS), MPa | 17 | |
| 37 to 110 |