Solder Alloy 801 vs. Automotive Grey Cast Iron
Solder alloy 801 belongs to the otherwise unclassified metals classification, while automotive grey cast iron belongs to the iron alloys. There are 24 material properties with values for both materials. Properties with values for just one material (4, in this case) are not shown.
For each property being compared, the top bar is solder alloy 801 and the bottom bar is automotive grey cast iron.
Metric UnitsUS Customary Units
Mechanical Properties
| Brinell Hardness | 22 | |
| 160 to 280 |
| Elastic (Young's, Tensile) Modulus, GPa | 53 | |
| 180 |
| Elongation at Break, % | 33 | |
| 9.6 to 14 |
| Poisson's Ratio | 0.35 | |
| 0.29 |
| Shear Modulus, GPa | 20 | |
| 69 to 70 |
| Tensile Strength: Ultimate (UTS), MPa | 55 | |
| 140 to 290 |
Thermal Properties
| Latent Heat of Fusion, J/g | 64 | |
| 260 to 280 |
| Melting Completion (Liquidus), °C | 200 | |
| 1380 to 1390 |
| Melting Onset (Solidus), °C | 200 | |
| 1340 to 1350 |
| Specific Heat Capacity, J/kg-K | 240 | |
| 490 |
| Thermal Conductivity, W/m-K | 61 | |
| 41 to 43 |
| Thermal Expansion, µm/m-K | 22 | |
| 12 to 14 |
Electrical Properties
| Electrical Conductivity: Equal Volume, % IACS | 15 | |
| 7.4 to 7.6 |
| Electrical Conductivity: Equal Weight (Specific), % IACS | 19 | |
| 8.8 to 9.1 |
Otherwise Unclassified Properties
| Density, g/cm3 | 7.2 | |
| 7.5 to 7.6 |
| Embodied Carbon, kg CO2/kg material | 14 | |
| 1.5 to 1.7 |
| Embodied Energy, MJ/kg | 240 | |
| 21 to 24 |
| Embodied Water, L/kg | 1140 | |
| 44 to 51 |
Common Calculations
| Stiffness to Weight: Axial, points | 4.1 | |
| 13 |
| Stiffness to Weight: Bending, points | 17 | |
| 25 |
| Strength to Weight: Axial, points | 2.1 | |
| 5.2 to 11 |
| Strength to Weight: Bending, points | 4.4 | |
| 8.0 to 13 |
| Thermal Diffusivity, mm2/s | 36 | |
| 11 to 12 |
| Thermal Shock Resistance, points | 3.3 | |
| 4.2 to 8.6 |