MakeItFrom.com
Menu (ESC)

ISO-WD32350 Magnesium vs. C23400 Brass

ISO-WD32350 magnesium belongs to the magnesium alloys classification, while C23400 brass belongs to the copper alloys. There are 22 material properties with values for both materials. Properties with values for just one material (10, in this case) are not shown. Please note that the two materials have significantly dissimilar densities. This means that additional care is required when interpreting the data, because some material properties are based on units of mass, while others are based on units of area or volume.

For each property being compared, the top bar is ISO-WD32350 magnesium and the bottom bar is C23400 brass.

Metric UnitsUS Customary Units

Mechanical Properties

Elastic (Young's, Tensile) Modulus, GPa 45
110
Poisson's Ratio 0.29
0.32
Shear Modulus, GPa 18
42
Tensile Strength: Ultimate (UTS), MPa 250 to 290
370 to 640

Thermal Properties

Latent Heat of Fusion, J/g 340
190
Maximum Temperature: Mechanical, °C 95
160
Melting Completion (Liquidus), °C 600
970
Melting Onset (Solidus), °C 560
930
Specific Heat Capacity, J/kg-K 990
390
Thermal Conductivity, W/m-K 130
120
Thermal Expansion, µm/m-K 25
19

Otherwise Unclassified Properties

Base Metal Price, % relative 12
27
Density, g/cm3 1.7
8.5
Embodied Carbon, kg CO2/kg material 23
2.6
Embodied Energy, MJ/kg 160
43
Embodied Water, L/kg 960
320

Common Calculations

Stiffness to Weight: Axial, points 15
7.2
Stiffness to Weight: Bending, points 68
19
Strength to Weight: Axial, points 39 to 46
12 to 21
Strength to Weight: Bending, points 50 to 55
13 to 19
Thermal Diffusivity, mm2/s 73
36
Thermal Shock Resistance, points 16 to 18
12 to 22

Alloy Composition

Aluminum (Al), % 0 to 0.1
0
Copper (Cu), % 0 to 0.1
81 to 84
Iron (Fe), % 0 to 0.060
0 to 0.050
Lead (Pb), % 0
0 to 0.050
Magnesium (Mg), % 95.7 to 97.7
0
Manganese (Mn), % 0.6 to 1.3
0
Nickel (Ni), % 0 to 0.0050
0
Silicon (Si), % 0 to 0.1
0
Zinc (Zn), % 1.8 to 2.3
15.7 to 19
Residuals, % 0
0 to 0.2