Ionomer vs. EVA
Both ionomer and EVA are thermoplastics. There are 12 material properties with values for both materials. Properties with values for just one material (5, in this case) are not shown.
For each property being compared, the top bar is ionomer and the bottom bar is EVA.
Metric UnitsUS Customary Units
Mechanical Properties
| Elastic (Young's, Tensile) Modulus, GPa | 0.4 | |
| 0.015 to 0.080 |
| Elongation at Break, % | 350 | |
| 300 to 800 |
| Tensile Strength: Ultimate (UTS), MPa | 37 | |
| 3.0 to 35 |
Thermal Properties
| Melting Onset (Solidus), °C | 94 | |
| 55 to 95 |
| Vicat Softening Temperature, °C | 72 | |
| 45 to 80 |
Electrical Properties
| Dielectric Constant (Relative Permittivity) At 1 Hz | 2.4 | |
| 2.8 |
| Dielectric Strength (Breakdown Potential), kV/mm | 39 | |
| 21 |
Otherwise Unclassified Properties
| Density, g/cm3 | 0.94 | |
| 0.93 to 1.0 |
Common Calculations
| Stiffness to Weight: Axial, points | 0.24 | |
| 0.0087 to 0.048 |
| Stiffness to Weight: Bending, points | 26 | |
| 8.6 to 15 |
| Strength to Weight: Axial, points | 11 | |
| 0.87 to 10 |
| Strength to Weight: Bending, points | 26 | |
| 4.8 to 26 |